Best current price£57.08from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£57.08Visit shop Lisse Screwless Deco Ggbl6012lmsss Led Universal Dimmer 1 Gang 2 Way 100W 3606481920355
Visit shop1 offer from £57.08
View price history by clicking the chart icon.
This Schneider Electric Lisse LED Universal Dimmer is designed for electricians and DIY enthusiasts undertaking new construction or refurbishment projects. Its key benefit is making painting and decorating easier due to its unique removable screwless cover and reliable clip-in system, while providing smooth dimming control for 100W LED loads. A potential caveat is that, like all dimmers, compatibility with specific LED bulbs should always be verified to avoid flicker or poor performance.
| Colour | Grey |
|---|---|
| Model Part Number | GGBL6012LMSSS |
| Brand | Schneider Electric |
This is a universal LED dimmer and is optimized for dimmable LED loads. While it might work with some low-voltage halogen or incandescent lights via a compatible transformer, it is primarily designed for LEDs.
The screwless cover can be cleaned with a soft, dry cloth. For tougher marks, use a slightly damp cloth with a mild, non-abrasive cleaner and dry immediately.
'1 Gang' refers to a single switch on the plate. '2 Way' means it can be used in a circuit where the light can be controlled from two different locations (e.g., top and bottom of stairs).
The maximum capacity for this dimmer is 100W when used with dimmable LED loads.
While the screwless design simplifies installation, electrical work should be carried out by a qualified person, especially if you are not experienced with wiring. Always follow local electrical regulations.
The cover is designed to be gently pulled away from the wall plate. It typically detaches from one edge, allowing access to the screws underneath.
Check that the power supply is on and that all wiring connections are secure. Verify the load is within the 100W limit and is compatible.
This usually indicates incompatibility between the dimmer and the LED bulbs. Try a different brand or model of dimmable LED, or consult the dimmer's compatibility guide.
Slight warmth is normal under load. If it feels excessively hot, ensure the load does not exceed the 100W capacity and that there is adequate ventilation around the back box.
Ensure you are using dimmable LED bulbs specifically designed for use with leading-edge dimmers. Some LEDs perform better with trailing-edge dimmers, which this is not.
Setup:
Compatibility:
Care:
