Saint-Gobain ADFORS Drywall Tape - Ultra Thin - 1-7/8 Inch by 300-Feet - White

The ultra-thin design reduces the thickness of the drywall joint, requiring less joint compound and leading to a smoother, more seamless finish with less sanding.

The 300-foot roll is suitable for both small repairs and larger renovation projects involving new drywall installation or significant patching.

While not explicitly stated as self-adhesive, drywall tapes of this type are typically designed to adhere firmly to the drywall surface when applied with pressure, often with a mild adhesive backing that holds it in place until compound is applied.

Start with a thin coat of compound, fully embedding the tape. Feather the edges outwards. Apply subsequent thin coats as needed, allowing each to dry, until the joint is flush with the wall surface.

The tape measures 1-7/8 inches wide and comes in a 300-foot roll.

This drywall tape is manufactured in China.

The weight of the product is 0.01 pounds.

Ensure the drywall surface is clean, dry, and free of dust, grease, or old paint. Re-apply pressure to ensure full contact.

Apply gentle, even tension when unrolling and applying the tape. Avoid sharp bends or pulling too aggressively.

Smooth the tape firmly from the center outwards after applying to eliminate air pockets. If significant, carefully lift and reapply, ensuring smooth contact.

Ensure adequate drying time between compound coats and that the tape is fully embedded. Use multiple thin coats of compound rather than one thick one.