UGREEN NAS 120W DC Uninterruptible Power Supply - 120W

The runtime depends on the power consumption of the connected device. With a 12,000mAh battery and 120W capacity, it can provide power for a typical UGREEN NAS for approximately 10-30 minutes, allowing for a safe shutdown.

This UPS provides a 12V DC output. Most laptops use AC power or different DC voltage/connector types. You would need a specific adapter or converter to use this UPS for a laptop, and ensure the power requirements match.

Please refer to the product packaging or UGREEN's official website for the most current warranty information specific to this model.

Your device must accept a 12V DC power input, have a current draw of 10A or less, and a total power consumption of 120W or less. Check your device's power adapter specifications.

Yes, the UPS provides stable 12V DC power to the connected device when mains power is available, filtering out minor fluctuations.

The UPS should remain plugged into a power source to ensure its battery is always charged and ready for use. It automatically maintains its charge.

Ensure the UPS is plugged in and powered on. Verify the DC output cable is securely connected to both the UPS and the device. Check if the connected device's power consumption exceeds the UPS's 120W limit.

The battery may be depleted or faulty. Ensure the UPS has been charging for an adequate period (e.g., 24 hours from first use). If the issue persists, the battery may need service.

Confirm the UPS power adapter is securely connected to both the wall outlet and the UPS. Try a different wall outlet. Ensure the power adapter is the original one supplied with the UPS.

Check the main power connection to the UPS. If the unit remains unresponsive, contact customer support.