Nilfisk Tornado Nozzle - Click & Clean

This nozzle is compatible with the C115, Centennial, C120.6, C120, C125, C130, E130, all E140 variants, and the Nilfisk Core Series. It is part of the Click & Clean range.

No, this nozzle is explicitly NOT compatible with the Nilfisk P150 or P160 range of pressure washers.

Align the nozzle with the Click & Clean connector on your Nilfisk pressure washer lance and push until it clicks securely into place. Ensure the pressure washer is off and disconnected from power before attaching.

You can carefully clear blockages using a small pin or a soft brush to remove any debris from the nozzle tip. Rinse with clean water afterwards.

This refers to the specific spray pattern and design of the nozzle, indicating it provides a 'Tornado' style spray for effective cleaning, is compact in size, and offers excellent performance within its intended use.

While effective for general cleaning, always test on an inconspicuous area first. For very delicate surfaces, you may need to adjust your pressure washer's settings or use a lower pressure nozzle to avoid damage.

Ensure you are using a compatible Nilfisk pressure washer model and that the lance and nozzle connection points are clean and free of debris.

Check that the nozzle tip is not blocked. Clean any obstructions. Also, verify that the pressure washer itself is functioning correctly and all connections are secure.

Ensure the nozzle is securely attached to the lance. Inspect the O-rings or seals on the lance connection for damage and replace if necessary.