Shock Arrestor - Altecnic - PV016E

Water hammer is a pressure surge or wave caused when a fluid in motion (usually water) is forced to suddenly stop or change direction.

Install it near appliances prone to water hammer, such as washing machines, dishwashers, and under sinks with quick-closing valves.

The Altecnic PV016E is designed for long-term use. Its lifespan depends on water quality and system usage but should provide many years of service.

Standard plumbing tools are required, including pipe wrenches, thread sealant, and possibly a tubing cutter, depending on your existing pipework.

If you are comfortable with basic plumbing, you can install the shock arrestor. However, if you are unsure, it's best to consult a professional plumber.

Check the installation, ensure the arrestor is the correct size for the system, and consider adding additional arrestors if necessary.

It contains a pressure vessel with a flexible membrane that absorbs the pressure surges caused by water hammer.

It is suitable for most domestic plumbing systems. Ensure the fitting size matches your existing pipework for compatibility.

Check installation for correct placement and ensure all connections are tight. The arrestor may be undersized for the system; consult a professional.

Tighten the fittings and ensure the correct sealant or thread tape has been used. If the leak persists, replace the fitting.

Ensure the arrestor is installed correctly, with no obstructions in the water flow path. Check for any debris that may have entered the system during installation.