Flexitaly Water Connector Hose Pipe - 80cm - 3/4 X 3/4 Inch

This refers to the type and size of the threaded connections. 'G3/4"' indicates the thread standard and size (3/4 inch nominal size for parallel pipe threads). 'Female' means the threads are on the inside of the fitting, designed to screw onto a male (external) threaded pipe or spigot.

The product description specifies it is designed for water connections. While stainless steel can withstand high temperatures, it's recommended to check the specific temperature rating for this model if continuous high-temperature use is planned. For general household use with hot and cold water, it is typically suitable.

No, this hose is specifically designed and rated for water connections only. It is not suitable or safe for use with gas.

Clean the exterior with a soft, damp cloth. For stubborn marks, a mild soap solution can be used, followed by rinsing with clean water and drying with a soft cloth. Avoid abrasive cleaners or scouring pads.

The product weighs approximately 1.433004703 Pounds.

It is good practice to inspect the hose at least annually, or more frequently if you notice any issues such as leaks or reduced water flow. Also, check before and after any significant plumbing work or appliance replacement.

Ensure the G3/4" threads are properly aligned and tightened. Check for any debris on the threads. Re-seat the connection and tighten slightly. If the leak persists, consider using a compatible thread seal tape (PTFE tape) on the male threads of the inlet valve, or inspect the internal seals of the hose connection.

Check if the hose is kinked or sharply bent. Ensure the 15mm bore is not obstructed. If connected to an appliance, check the appliance's internal filters for blockages.

This hose is 80cm. For installations requiring different lengths, ensure you select the appropriate product size prior to purchase. Adapters are not recommended as they can introduce additional points of failure.