Sealey Engineer's Emery Roll - 50mm x 50m - 320Grit

This emery roll is 320 grit.

No, this emery roll is specifically designed for metal surfaces and is not suitable for use on wood.

The emery roll comes in a dispenser box. Simply pull the desired length of abrasive material from the box; it is ready for use.

The roll measures 50mm in width and 50m in length.

Its primary uses are for rust removal, general finishing, and pre-polishing of metal surfaces.

No, this emery roll is designed for hand operation and manual sanding tasks.

Store the emery roll in its original dispenser box in a dry location to protect it from moisture and damage.

Ensure you are applying adequate pressure. Check if the abrasive has become loaded with debris; if so, try a fresh section or clean with a brush if possible. Confirm the material you are working on is compatible (metal).

Pull only the required length from the dispenser. Avoid excessive force when sanding. Ensure the roll is not snagged within the dispenser.

Ensure consistent pressure and movement. Use a sanding block if necessary for larger flat surfaces to maintain an even contact. Use a fresh section of the roll for a consistent grit.