Greenhouse Insulation/Shading Clips - Standard Clips / 30 - Gardening Naturally

The clips are approximately 50mm long and have a diameter of about 20mm.

These clips are designed specifically for aluminum greenhouses with standard glazing bars. They are not suitable for other frame materials like wood or PVC.

Slot the clip into the glazing bar, twist to secure, and then push the fabric, fleece, or netting through the pointed end. Place the washer on the smooth side down against the material.

Yes, the handy hole provided in the clip can be used for tying down other items, not just insulation or shading materials.

This product is for 'Standard Clips / 30', indicating a pack of 30 clips.

Yes, they act as a 40mm spacer between the glass and the attached material, creating an air gap that significantly improves the performance of insulation.

Gardening Naturally also offers greenhouse corner clips for securing corners. This specific product is for standard clips.

Ensure you are using an aluminum frame with compatible glazing bars. Check that the clip is inserted fully before twisting. The glazing bar profile may not be standard.

Ensure the washer is correctly placed and tightened. Try securing the material further down the pointed end. For heavier materials, consider using additional clips or tying methods.

Apply steady, even pressure when twisting to secure. Do not force the clip if it meets significant resistance. Check for any obstructions in the glazing bar.