Priory 340 Scaffold Podger Hammer

A scaffold podger hammer is a specialized hammer designed for constructing and dismantling scaffolding. It typically features a hammer head on one side and a tapered, cranked pin (podger) on the other, used for aligning and inserting scaffold fittings.

One-piece forging means the entire hammer, including the head and handle, is shaped from a single piece of metal. This method creates a tool that is exceptionally strong, durable, and resistant to breakage compared to hammers with separate heads and handles.

The hammer has a length of 270mm, which is equivalent to 11 inches.

While it can be used for some general hammering, its design is optimized for scaffolding. The podger end is specific for scaffold fittings, and its weight and balance are tailored for that purpose. For general DIY, a standard claw hammer might be more suitable.

After use, dry the hammer completely. Store it in a dry location. Periodically, you can apply a thin layer of oil to the metal surfaces for added protection against corrosion.

The hammer is designed for compatibility with most scaffold systems. However, minor variations in fittings across different manufacturers may exist. The tapered design generally aids in alignment across common systems.

As this is a one-piece forging, the head should not become loose. If it appears unstable, inspect the hammer for cracks. If damage is found, the hammer should be retired from service.

Ensure you are using the correct scaffold system and that the holes are clear of obstruction or debris. The taper on the podger is designed for alignment; gentle tapping may be required.

Light rust can often be removed with a fine-grade steel wool or wire brush. To prevent future rust, ensure the hammer is dried thoroughly after use and stored in a dry place. Applying a light coat of oil can also offer protection.