Best current price£39.06from eBay
Shopping.co.uk recommended and popular offers
eBay£39.06Visit shop 4 x Novol Spectral UNDER 395 Epoxy Primer 500ml Aerosol Colour: White
Visit shop2 offers from £39.06 - £42.77
View price history by clicking the chart icon.
Designed for automotive, industrial, and DIY enthusiasts, the Spectral Bare Metal Anti-Corrosive Smooth Service Primer is an essential tool for anyone looking to prepare raw metal surfaces for a durable paint job. Its primary benefit is providing superior protection against rust and corrosion while creating a perfectly smooth, high-adhesion base for topcoats. However, users should note that as an aerosol product, it requires careful ventilation and proper environmental conditions to ensure optimal application and drying.
| Colour | White |
|---|---|
| Model Part Number | Bare Metal Anti-Corrosive Smooth Service Primer |
| Brand | Spectral |
| Container Volume | 500ml |
This formula is specifically engineered for bare metal; using it on plastic or wood may result in poor adhesion.
For a standard finish, light sanding with fine-grit paper can improve smoothness, but the formula is designed for excellent adhesion on its own.
Refer to the drying times on the canister, as temperature and humidity significantly affect cure times. Generally, it is best to wait until the surface is fully touch-dry and hardened.
While it offers excellent anti-corrosive properties, it is not specifically marketed as a high-heat exhaust or engine paint.
White is a neutral base. It is excellent for lighter-colored topcoats and helps confirm total coverage, though it may require more coats if you are painting over with a very dark or transparent color.
Clear the nozzle by inverting the can and spraying, or soak the nozzle tip in mineral spirits to dissolve dried paint.
This is often caused by spraying from too far away. Move closer to the surface or adjust your spraying speed to ensure a 'wet' coat.
You are applying too much product in one pass. Apply several light, thin coats rather than one heavy, saturated coat.
To achieve the best results, shake the canister vigorously for at least two minutes before spraying to ensure the pigments and anti-corrosive agents are fully mixed. Always perform a test spray on a piece of scrap metal to calibrate your speed and distance. For the best compatibility, ensure your intended topcoat is chemically suited for use over an aerosol primer. When finished, invert the can and spray for a few seconds to clear the nozzle, preventing clogs for future use. Store the canister in a cool, dry, and well-ventilated area, away from direct sunlight or extreme temperatures.
