Shimano Workshop Internal gear hub maintenance oil dipping set
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for cyclists who want to maintain the performance and longevity of their Shimano internal gear hubs. The Shimano Workshop Internal gear hub maintenance oil dipping set provides a simplified and effective method for lubricating your hub, resulting in enhanced durability. Keep in mind that this method is specifically designed for Shimano internal gear hubs and may not be compatible with other hub types.
All features
| Brand | SHIMANO |
|---|
Extended Product Information
FAQs
How often should I use the dipping set?
This depends on riding conditions and frequency of use. As a general guideline, lubricate your hub every 6 months or 500-1000 miles, or more often if riding in wet or harsh conditions.
Can I use this oil on other types of hubs?
No, this oil is specifically designed for Shimano internal gear hubs. Using it on other types of hubs may damage them.
How much oil is needed for each maintenance cycle?
The dipping kit comes with a sufficient amount of oil for one maintenance cycle. You may need to purchase additional oil separately for future servicing.
What should I do with the used oil?
Dispose of the used oil responsibly according to your local environmental regulations. Do not pour it down the drain or into the ground.
Is any special equipment needed?
Besides the dipping kit, you'll need tools to disassemble and reassemble your wheel and hub. Also ensure to have a suitable container for the dipping process, if one is not provided with your kit.
What are the signs that my hub needs maintenance?
Sluggish gear changes, difficulty shifting, and unusual noises from the hub are all signs that your hub may need maintenance. Also, a visual inspection for dirt and debris can indicate the need for service.
Can I over-lubricate the hub?
While it's difficult to over-lubricate with this method, excessive oil can cause problems. Make sure to allow excess oil to drain before reassembling.
Troubleshooting
Gear shifting is still sluggish after maintenance.
Ensure the oil has thoroughly penetrated all parts of the hub. Check for any obstructions or damage within the hub itself.
Hub is noisy after maintenance.
Excess oil may be present. Allow more time for draining, or reassemble the hub and ride the bike to distribute the oil evenly. Check that the hub is correctly assembled.
Pros and Cons
Pros
- Extends the life of your internal gear hub.
- Ensures optimal performance of your Shimano hub.
- Easy to use dipping method.
- Uses genuine Shimano lubricant specifically formulated for internal gear hubs.
Cons
- Only compatible with Shimano internal gear hubs.
- Requires disassembly and reassembly of the wheel.
- May require some mechanical experience.
- Requires a specific dipping container (not included in all kits).
Setup, Compatibility & Care
- Compatibility: This set is specifically designed for Shimano internal gear hubs. Verify hub compatibility before use.
- Setup: Disassemble the internal unit from your wheel.
- Dipping Process: Immerse the internal unit in the Shimano oil for 90 seconds.
- Dripping: Allow the surplus oil to drip off.
- Reassembly: Reassemble the unit back into the wheel.
- Care: Regularly inspect your hub for any signs of wear or damage. Clean the hub and apply the oil as needed, particularly after riding in wet or muddy conditions. Follow Shimano's recommended maintenance schedule.