Best current price£83.45from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£83.45Visit shop Truthear X Crinacle Zero:blue2 Dual Dynamic Drivers In-Ear Headphone With Detachable Cable (3.5Mm) 6975462650183
Visit shop2 offers from £83.45 - £96.19
View price history by clicking the chart icon.
The TRUTHEAR x Crinacle Zero:BLUE2 is designed for audiophiles and casual listeners seeking a refined listening experience with a focus on clear mids and highs. Its key benefit is its dual-driver system that delivers detailed sound across frequencies, making it ideal for music, monitoring, calls, and gaming. A potential caveat is its low impedance, which may benefit from a dedicated amplifier for optimal performance with all source devices.
| Colour | Blue |
|---|---|
| Series | ZERO |
| Model Part Number | Zero:BLUE2 |
| Brand | TRUTHEAR |
The Zero:BLUE2 features a dual dynamic driver system with a specific 7.8mm driver for mid-high frequencies and utilizes an LCP composite diaphragm, along with an upgraded silver-plated copper coaxial cable and a 0.78mm 2-pin connector for enhanced performance and durability.
While the Zero:BLUE2 is designed to be easily driven by most smartphones and devices due to its low impedance (5.8Ω) and high sensitivity, using a dedicated DAC/amplifier can provide a cleaner signal and potentially unlock its full sonic potential, especially if your source device has a high output impedance.
Gently wipe the earpieces with a soft, dry cloth. For tougher marks, a slightly damp cloth (water only) can be used, followed by thorough drying. Avoid using harsh chemicals or solvents.
Yes, the Zero:BLUE2 uses a standard 0.78mm 2-pin connector, allowing you to easily replace or upgrade the cable with any compatible aftermarket option.
The microphone version is primarily beneficial if you frequently use your headphones for calls, online meetings, or gaming where voice communication is important. For pure music listening, the standard version is sufficient.
The impedance is 5.8Ω ± 15% @ 1kHz, and the sensitivity is 119.5dB/Vrms @ 1kHz.
It utilizes a dual dynamic driver system, consisting of a 10mm driver and a 7.8mm driver specifically tuned for mid-high frequencies.
Ensure the cable is securely connected to both the earpieces and the audio source. Check that the earpiece nozzle is not blocked by earwax or debris. Try a different audio source and cable if available.
Verify that the audio source volume is not too high, causing clipping. Clean the earpiece nozzles. Ensure the earpieces are properly seated in your ears for a good seal. Try connecting to a different, cleaner audio source.
Inspect the cable for visible damage. Try detaching and reattaching the cable to the earpieces. If the issue persists, the cable may need to be replaced.
Ensure the microphone cable is fully plugged into the earpiece and the device. Check your device's audio input settings to ensure the microphone is selected and not muted. Test the microphone on a different device or application.
Setup:
Compatibility:
Care:
