Shopping.co.uk

Pepte 5 X 22mm Schoolboard Pipe Clips Pressed Brass Screw-On Brackets - SBC22

Pepte 5 X 22mm Schoolboard Pipe Clips Pressed Brass Screw-On Brackets - SBC22

These pressed brass 22mm pipe clips are designed for securely mounting or suspending copper pipe a...

Best current price£11.99from B&Q

Best offers

Shopping.co.uk recommended and popular offers

All Offers

6 offers from £11.99 - £28.99

View price history by clicking the chart icon.

B&QB&Q - 5 X 15mm Schoolboard Pipe Clips Pressed Brass Screw-On Brackets
Free delivery in 1–3 days
£11.99
Visit shop

Product Information

Full details

This guide is for plumbers, contractors, and DIY enthusiasts needing to securely mount 22mm copper pipes. The Pepte 22mm Schoolboard Pipe Clips offer a durable, corrosion-resistant solution for reliable pipe suspension. While highly effective, they are specifically designed for copper pipe and may not be suitable for other materials without appropriate adapters.

All features

Model Part NumberSBC22
BrandPEPTE

Extended Product Information

FAQs

What is the primary material of these pipe clips?

These pipe clips are constructed from solid pressed brass.

What pipe size are these clips designed for?

They are specifically designed for 22mm diameter copper pipes and tubing.

Are screws included with the pipe clips?

No, screws for mounting the clips to the wall or surface are not included and must be sourced separately based on your mounting needs.

Can these clips be used for plastic pipes?

These clips are designed for copper pipes. Using them with plastic pipes is not recommended as it may not provide a secure fit or could damage the pipe.

How many clips are in a pack?

Each pack contains 5 Pepte 22mm Schoolboard Pipe Clips.

Are these clips suitable for outdoor use?

Brass is corrosion-resistant, making them suitable for many outdoor applications. However, consider the environmental conditions to ensure longevity.

What makes the 'splitable design' beneficial?

The fully splitable design, enabled by the central screw, allows you to easily open the clip completely, making it very simple to place the pipe inside and then tighten the clip around it securely.

Troubleshooting

Clip does not hold pipe securely

Ensure the central screw is fully tightened. Verify the pipe diameter is precisely 22mm. Check that the clip is mounted firmly to the surface.

Screw will not tighten into the wall

Ensure you are using a screw of appropriate length and type for the mounting surface. If using a wall plug, confirm it is suitable for the material and the hole size.

Pipe seems to be slipping over time

Re-tighten the central screw. Ensure there is no excessive vibration or movement at the mounting point.

Pros and Cons

Pros

  • Durable and long-lasting due to solid brass construction.
  • Resistant to corrosion and environmental degradation.
  • Easy to install and adjust thanks to the splitable design.
  • Provides a secure and neat mounting solution for 22mm copper pipes.
  • Suitable for both domestic and commercial plumbing applications.

Cons

  • Limited to 22mm copper pipes; not universally compatible with all pipe sizes or materials.
  • Requires a suitable surface and appropriate fixings (screws/anchors) for mounting, which are not included.
  • Brass can be prone to scratching if not handled with care during installation.

Setup, Compatibility & Care Instructions

Setup:

  1. Position the Clip: Place the split clip around the 22mm copper pipe at the desired mounting location.
  2. Mark the Mounting Point: Gently tighten the central screw to hold the pipe, then mark the screw hole's position on the wall or mounting surface.
  3. Prepare the Surface: Drill a hole at the marked point and insert an appropriate wall plug if mounting into drywall or masonry. If mounting into wood, pilot holes may be beneficial.
  4. Secure the Clip: Unscrew the central screw slightly to allow removal of the pipe. Align the clip's mounting hole with the prepared surface or wall plug. Insert a suitable screw (not included) through the clip and tighten firmly into the surface.
  5. Re-insert Pipe & Tighten: Place the pipe back into the clip and fully tighten the central screw to secure the pipe in place.

Compatibility:

  • Primary Use: Designed exclusively for 22mm diameter copper pipes and tubing.
  • Mounting Surfaces: Suitable for wood, plasterboard (with appropriate fixings), brick, and concrete.

Care:

  • Clean with a soft, damp cloth. Avoid abrasive cleaners which may scratch the brass surface.
  • For external use, ensure the surrounding environment does not promote excessive corrosion of brass.

Price History

DatePrice
Visit shop