Plumbright 15mm Equal Elbow - SPE6766M
Best current price£1.18from City Plumbing GB
Best offers
Shopping.co.uk recommended and popular offers
City Plumbing GB£1.18Visit shop Plumbright White 15Mm Equal Elbow Plastic Spe6766m
Visit shopCity Plumbing GB£1.18Visit shop One Offer
1 offer from £1.18
View price history by clicking the chart icon.
City Plumbing GBPlumbright White 15Mm Equal Elbow Plastic Spe6766m
Free delivery in 1–3 days
£1.18
Visit shop
Product Information
Full details
The Plumbright 15mm Equal Elbow (SPE6766M) is designed for professional tradespeople and DIY enthusiasts needing a reliable, tool-free solution for redirecting 15mm pipework in domestic and light commercial plumbing systems. Its primary benefit is the significantly reduced installation time achieved through its push-fit mechanism, eliminating the need for traditional soldering. However, users should note that it is specifically engineered for 15mm pipes, requiring precise pipe preparation to ensure a watertight seal.
All features
| Model Part Number | SPE6766M |
|---|---|
| Brand | Plumbright |
Extended Product Information
FAQs
Is this elbow suitable for central heating systems?
Yes, it is engineered to withstand the high temperatures and pressures typical of domestic central heating systems.
Can I use this with copper and plastic pipe?
It is designed for standard 15mm pipe. Ensure that if using plastic pipe, you insert the appropriate pipe stiffener required for push-fit connections.
Does this fitting require a sealant?
No, it features internal O-rings that create a watertight seal upon insertion; additional sealant or pipe dope is typically unnecessary.
Is it safe for drinking water?
Yes, the product holds WRAS approval, making it safe for use in potable water supply lines.
Can I rotate the fitting after it has been pushed on?
While the fitting is designed to hold securely, it may be rotated to align the pipework without breaking the seal, provided it is not pulled outward.
Troubleshooting
The fitting is leaking immediately after installation.
Remove the pipe and inspect the end for burrs, sharp edges, or debris. Ensure the pipe is pushed in fully past the O-ring.
Cannot remove the fitting from the pipe.
Use a specialized push-fit release tool to disengage the internal gripping ring before pulling the pipe away.
The pipe feels loose after insertion.
Verify that you are using standard 15mm pipe. If the pipe wall is too thin or scored, the internal teeth may not be able to grip the surface effectively.
Pros and Cons
Pros
- Significantly faster installation compared to soldered fittings
- No open flames or specialized soldering equipment required
- High safety standards with WRAS and KITEMARK approval
- Clean, professional white aesthetic for exposed areas
- Suitable for both heating and cold/hot water systems
Cons
- Requires proper pipe preparation to prevent leaks
- Not compatible with pipes other than 15mm
- May require a removal tool for disassembly
Setup, Compatibility & Care
To install, ensure the 15mm pipe end is cut square and is completely free of burrs or surface scratches, as these can damage the internal O-ring seal. Use a pipe cutter for the cleanest results. Push the pipe firmly into the elbow until you feel it hit the internal stop; a slight twist during insertion can help seat the pipe properly.
For care and maintenance, keep the fitting free from aggressive chemical cleaners that could degrade the polymer. If you need to disassemble the connection, use a dedicated push-fit release tool to avoid damaging the internal grabbing teeth. Always check the connection under pressure before closing up walls or boxing in the pipework.