Dulux Trade All Seasons Smooth Masonry Gloss - Cream - 5L

No, for health and safety reasons related to solvent-based paints, spray application is not recommended for Dulux Trade Weathershield Masonry Gloss.

The paint covers up to 14 square meters per litre, depending on the surface and application method.

The paint dries in approximately 4 hours. It can be recoated after 16 hours.

No, Dulux Trade Weathershield Masonry Gloss is specifically designed for exterior masonry surfaces and is not suitable for indoor use.

It is best used on concrete and masonry. It can also be applied over surfaces previously painted with masonry paint, including solvent-based finishes.

After use, remove as much paint as possible from brushes and rollers, then clean them thoroughly with water.

The product offers a 10-year protection term against all weather conditions.

This is a solvent-based paint.

Ensure the surface was properly prepared, clean, dry, and sound. Use a suitable primer (like Weathershield Stabilising Primer) for powdery or friable surfaces. Ensure adequate thinning for the first coat on new or bare surfaces.

Stir the paint thoroughly before and during application. Apply using smooth, even strokes with a good quality brush or roller. Avoid overworking the paint. Ensure consistent application conditions.

While the paint contains fungicide, persistent dampness or poor ventilation can still encourage mould. Ensure adequate drainage and ventilation around the painted area. Re-clean affected areas if necessary and apply a fresh coat if the issue persists.

For new/bare surfaces, thin the first coat with white spirit (up to 1 part white spirit to 10 parts paint). Do not thin subsequent coats unless absolutely necessary and follow recommended thinning ratios. Ensure paint is at an appropriate working temperature.