Best current price£7.88from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£7.88Visit shop Iec C14 To 2 Way Gang Uk Mains Sockets Lead Ups Power Splitter 1M 5055383481507
Visit shop
B&Q£8.63Visit shop B&Q - Iec C14 To 2 Way Gang Uk Mains Sockets Lead Ups Power Splitter 1M
Visit shop4 offers from £7.88 - £8.63
View price history by clicking the chart icon.
This 1-meter kenable 008150 power splitter is designed for users who need to connect multiple standard UK devices to a single IEC C14 input, commonly found on UPS units. Its key benefit is efficiently expanding power access for peripherals like monitors or chargers from a UPS. A caveat is its maximum 10A current rating, which requires mindful load balancing for connected devices.
| Model Part Number | 008150 |
|---|---|
| Brand | kenable |
The splitter is rated for a maximum of 10 Amps (A) across both sockets combined. Ensure the total power draw of connected devices does not exceed this limit.
Yes, you can plug any standard UK 3-pin (Type G, BS 1363) device into the two output sockets, provided their combined power draw does not exceed the 10A limit.
The input connector is an IEC C14 plug, commonly found on Uninterruptible Power Supplies (UPS) and some power conditioners.
No, this splitter does not have an individual on/off switch. Power is controlled by the source device it is plugged into.
No, the cable length is fixed at 1 meter.
This device has a tamper-proof design and requires a specific Tri-wing screwdriver for disassembly. It is not designed for user servicing.
RoHS (Restriction of Hazardous Substances) compliance means the product meets EU standards restricting the use of certain hazardous materials in electrical and electronic equipment.
Ensure the IEC C14 plug is fully seated in the power source. Verify that the power source (e.g., UPS) is active and functioning. Check that the total load on both sockets does not exceed the 10A limit.
Try plugging the device into the other socket to rule out a faulty socket. Ensure the cable is not damaged. If the issue persists, the splitter may be faulty.
Immediately disconnect the splitter and all connected devices from the power source. This indicates a potential overload or internal fault. Do not use the splitter again and consider replacing it.
Setup: Simply plug the IEC C14 connector into a compatible IEC C13 or C14 power source, such as a UPS or power strip. Then, plug your standard UK mains devices into the two Type G (BS 1363) sockets.
Compatibility: This splitter is compatible with any device featuring an IEC C13 or C14 input socket. The output sockets are standard UK 3-pin Type G (BS 1363).
Care: Keep the splitter in a dry environment. Clean the exterior with a soft, dry cloth. Avoid using liquids or abrasive cleaners. Ensure the cable and connectors are free from dust and debris. Do not exceed the maximum 10A load.
