Proses Ballast Gluer - BS-FIX-01
Best current price£30.06from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£30.06Visit shop Proses BS-FIX-01 Ballast Gluer for HO/OO Track
Visit shopeBay£30.06Visit shop All Offers
3 offers from £30.06 - £33.00
View price history by clicking the chart icon.
Proses BS-FIX-01 Ballast Gluer (Fixer) for HO/OO ScaleTracksFree delivery in 1–3 days£31.64Visit shop →
Proses BS-FIX-01 Ballast Glue Applicator OO/HO Gauge£5.00 delivery£33.00Visit shop →
Product Information
Full details
The Proses BS-FIX-01 Ballast Gluer is designed for model railway enthusiasts building HO/OO scale tracks who need a precise and efficient way to apply ballast adhesive. Its key benefit is ensuring glue is applied only between sleepers, preventing contamination of the rails. A potential consideration is the learning curve for achieving perfect application with the air-interruption mechanism.
All features
| Model Part Number | PBS-FIX-01 |
|---|---|
| Brand | Proses |
Extended Product Information
FAQs
What scale is the Proses Ballast Gluer designed for?
The BS-FIX-01 is specifically designed for HO and OO scale model railway tracks.
How does the applicator ensure glue is only applied between sleepers?
The applicator features guiding slots that position it over the rails, and a mechanism controlled by turning a wheel that interrupts the air supply, allowing precise dispensing of adhesive only in the intended area between the sleepers.
What type of adhesive can I use with this tool?
You can use most standard ballast adhesives formulated for model railroads. Ensure the adhesive is of a suitable viscosity for dispensing.
How do I clean the ballast gluer?
After use, clean the interior thoroughly to prevent adhesive from drying and clogging the mechanism. Wipe the exterior with a damp cloth. Refer to the 'Care' section for detailed instructions.
Will this tool contaminate my rails with glue?
The design with guiding slots and precise application aims to prevent glue from reaching the running surface of the rails. However, careful usage and immediate cleanup of any excess are recommended.
How does the airtight seal work?
Magnets are used to create an airtight seal within the applicator, which helps to keep the adhesive fresh and prevents it from drying out when not in use.
Troubleshooting
Glue is not dispensing.
Check that the air supply is not fully interrupted by turning the wheel. Ensure the adhesive is fluid enough and the applicator is properly filled. Verify the magnets are sealing correctly.
Uneven glue application.
Practice on a scrap piece of track to get a feel for the rate of glue dispensing versus movement speed. Ensure the applicator is held steady and the wheel is turned consistently.
Adhesive contaminating the rails.
Ensure the guiding slots are correctly positioned over the rails and that you are applying the minimum necessary amount of glue. Clean any excess glue immediately before it dries.
Difficulty sealing the applicator.
Ensure the magnetic surfaces are clean and free from debris. Check for any warping or damage to the sealing surfaces.
Pros and Cons
Pros
- Ensures clean rails by precisely applying glue between sleepers.
- Reduces adhesive waste and mess.
- Offers controlled application for consistent results.
- Airtight seal keeps adhesive fresh.
- Designed specifically for HO/OO scale track work.
Cons
- Requires a slight learning curve for optimal glue placement.
- Primarily designed for a specific scale (HO/OO).
- May require cleaning after each use to maintain performance.
- Relies on a clean air supply for consistent operation.
Setup, Compatibility & Care
Setup:
- Ensure the applicator is clean before first use.
- Fill the applicator with your preferred ballast adhesive according to its instructions.
- Place the applicator onto the HO/OO scale track, ensuring the guiding slots are aligned with the rails.
Compatibility:
- This tool is specifically designed for HO/OO scale model railway tracks.
- It is compatible with most standard ballast adhesives suitable for model railroading.
Care:
- After each use, thoroughly clean the interior of the applicator to prevent adhesive buildup.
- Wipe down the exterior with a slightly damp cloth.
- Store in a dry place, ensuring the airtight seal is maintained.