Hycote Touch Up Brush - White - 12.5ml

Clean the area thoroughly with a degreaser, ensuring it is completely dry. Remove any loose paint or rust. Lightly sand the edges of the scratch if necessary and wipe clean.

Yes, the paint is suitable for use on plastics, as well as metals, wood, and ceramics.

The paint is fast-drying. Typically, a light touch can be made after a short period, with a second coat recommended after approximately one hour, depending on ambient temperature and humidity.

When stored correctly with the cap tightly sealed in a cool, dry place, the paint typically remains usable for several years. However, performance may slightly decrease over extended periods.

This touch-up paint is designed to match the base coat color. For best results on minor chips that have gone through the base coat, apply to the base color. It is not a clear coat substitute.

No, this product is specifically designed for small touch-ups such as scratches and stone chips. It is not intended for covering larger areas.

For best results, apply one thin, even coat and allow it to dry. If needed, apply a second thin coat after the first has dried sufficiently (usually around one hour).

Ensure the pen has been shaken vigorously for the recommended time. Check if the brush tip is blocked; gently clear any dried paint.

Apply thin, even coats rather than one thick coat. Use light, consistent strokes. Allow adequate drying time between coats.

Verify the exact vehicle make, model, and year. Ensure the surface was properly cleaned and prepped. Different lighting conditions can affect perceived color match.

The surface must be completely clean, dry, and free from wax, grease, or polish. Ensure proper shaking of the product before use.