Warren Reed - Designer Baby Pink And Black Marble Effect Kitchen Splashback - W600Mm X H750Mm
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for homeowners looking to add both style and practicality to their kitchen. The Warren Reed - Designer Glass Kitchen Splashback offers a durable, hygienic, and visually striking upgrade, with a key benefit of easy cleaning. A minor caveat is the specific adhesive required for installation, which is not included.
All features
| Model Part Number | WR01048-P447 |
|---|---|
| Brand | Warren Reed - Designer |
Extended Product Information
FAQs
What type of adhesive should I use?
You must use Clear Natural Curing Adhesive. This is crucial for proper and safe installation. Do not use other types of adhesives.
Can I drill holes in the splashback for electrical outlets?
No, this splashback is not designed to be drilled. Installation is typically done without drilling through the glass itself.
How do I clean tough grease stains?
For tough grease stains, use a good quality kitchen degreaser suitable for glass surfaces. Apply sparingly, let it sit for a minute, then wipe with a damp cloth and dry thoroughly.
What are the available sizes?
The splashback is available in several standard sizes, including W600mm x H750mm, W700mm x H750mm, W900mm x H750mm, W600mm x H600mm, W600mm x H650mm, W700mm x H650mm, and W900mm x H650mm.
Is the printed design durable?
Yes, the high-resolution print is applied to the underside of the toughened glass, protecting it from wear, heat, and splashes, ensuring its longevity and vibrant appearance.
What is the warranty period?
The splashback comes with a 1-year guarantee against manufacturing defects.
Can this splashback be installed behind any type of hob?
Yes, it is suitable for installation behind most types of hobs, including gas and electric, due to its heat resistance up to 400°C.
Troubleshooting
Splashback does not adhere to the wall.
Ensure the wall surface is clean, dry, and free from dust or grease. Verify that the correct Clear Natural Curing Adhesive was used and applied according to the manufacturer's instructions. Check that the adhesive has been allowed to cure fully.
Streaks or smudges appear after cleaning.
Use a non-abrasive cleaner and a clean microfiber cloth. Avoid using too much cleaner. Ensure the cloth is damp, not wet, and dry the surface immediately after cleaning with a separate dry cloth to prevent streaks.
Glass appears chipped or cracked.
This is a sign of physical damage. While the glass is toughened, it can be susceptible to impact. Contact customer support if the damage occurred during installation or is a manufacturing defect. Inspect for damage before installation.
Pros and Cons
Pros
- Enhances kitchen aesthetics with a striking design.
- Durable and long-lasting due to premium toughened glass.
- Hygienic and simple to clean, ideal for busy kitchens.
- Provides protection against heat and oil splashes.
- Easy to install, saving time and effort.
Cons
- Requires a specific Clear Natural Curing Adhesive for installation.
- Glass can be heavy, potentially requiring two people for safe handling and installation.
- Limited to specific sizes, which may not fit all kitchen dimensions perfectly.
- While scratch-resistant, sharp impacts could still cause damage.
- The 1-year guarantee is shorter than some other kitchen fixture warranties.
Setup, Compatibility & Care
Setup: Installation requires a clean, dry, and flat wall surface. Ensure you have Clear Natural Curing Adhesive readily available, as this is specifically recommended for bonding the glass to the wall. Apply the adhesive evenly to the back of the splashback or directly to the wall according to the adhesive manufacturer's instructions. Carefully position the splashback, applying gentle pressure to ensure full contact. Allow the adhesive to cure completely as per its instructions before exposing the splashback to heat or moisture.
Compatibility: This splashback is designed for installation onto most standard wall surfaces, including plasterboard and tiles, provided they are sound and flat. It is compatible with most types of cooktops, including gas and electric.
Care: Cleaning is straightforward. Wipe the surface with a soft, damp cloth and a non-abrasive kitchen cleaner. Avoid using harsh chemicals, abrasive scouring pads, or steel wool, as these can scratch the glass. For stubborn marks, a specialized glass cleaner can be used. Ensure any cleaning products are rinsed off thoroughly.