Tetrosyl TBL005 Chassis Paint in Black, 5L is a high-quality alkyd-based paint that offers robust ...Tetrosyl TBL005 Chassis Paint in Black, 5L is a high-quality alkyd-based paint that offers robust and durable protection against rust and corrosion, while also providing a decorative gloss finish. This chassis paint is suitable for application on most properly prepared surfaces. Once fully cured, it is resistant to petrol, derv, oil, and grease. For brush application, no thinning is required. For hot spray application (Black & Red), no thinning is needed. For cold spray, thinners (white spirit or xylene) at 5-10% may be required. Apply 1 or 2 coats by spray as needed, or a single coat by brush or roller. Approximate coverage is 10-12 square metres per litre, depending on viscosity and film build. It is handleable in 1 hour at 20°C and hard dry in 5 hours at 20°C. It is recoatable after 16 hours at 20°C. This product is subject to regulations governing the storage of highly flammable liquids and liquefied petroleum gases. It protects against rust and corrosion, providing a high gloss finish that is resistant to most automotive chemicals. Tetrosyl Limited is Europe's largest manufacturer and supplier of car care products, and the UK's biggest independent oil blender, with a global reach to 100 countries.
Tetrosyl Black Chassis Paint 5LFree delivery in 1–3 days£96.99Visit shop →
Product Information
Full details
This guide provides essential information for users of Tetrosyl TBL005 Chassis Paint (Black, 5L). It's designed for anyone needing durable, protective, and visually appealing paint for vehicle chassis and similar metal surfaces. The key benefit is robust rust and corrosion protection with a high-gloss finish. Note that proper surface preparation is crucial for optimal results.
All features
Model Part Number
TBL005
Brand
Tetrosyl
Extended Product Information
FAQs
How much area does a 5L can cover?
Approximately 10-12 square meters per liter, depending on viscosity and film build.
What is the drying time?
Handleable in 1 hour and hard dry in 5 hours at 20°C. Recoatable after 16 hours at 20°C.
Can I use this paint on plastic or rubber?
No, this paint is specifically designed for metal surfaces. It is not recommended for use on plastic or rubber.
What kind of thinner should I use for cold spray application?
Use white spirit or xylene, at a ratio of 5-10%.
Is this paint resistant to gasoline?
Yes, once fully cured, it is resistant to petrol, derv, oil, and grease.
What are the storage requirements?
Store in a cool, well-ventilated area, away from direct sunlight and sources of ignition. Follow regulations for flammable liquids storage.
Can I apply this paint with a roller?
Yes, it can be applied with a brush, roller, or spray.
What is the brand of this paint?
The brand is Tetrosyl.
Troubleshooting
Paint is running or sagging after application.
Apply thinner coats, avoid applying too much paint at once. Ensure the surface is clean and prepared properly.
Paint is not drying properly.
Ensure proper ventilation and temperature (ideally 20°C). Check for excessive humidity. Ensure proper mixing and application of any required thinners.
Poor coverage.
Ensure the surface is properly prepared. Apply additional coats as necessary, allowing for appropriate drying time between coats.