Best current price£25.20from eBay
Shopping.co.uk recommended and popular offers
eBay£25.20Visit shop Laser Tools 8847 Twister Style Internal O-Ring Seal Fitting Tool 3 Piece Set
Visit shop5 offers from £25.20 - £45.49
View price history by clicking the chart icon.
This Internal O-Ring Seal Fitting Tool Set by Laser Tools (model 8847) is designed for automotive, marine, HGV, and agricultural engineers who need to efficiently install internal hydraulic cylinder seals, shaft seals, motorcycle fork seals, and brake calipers. Its key benefit is simplifying the often-difficult task of fitting seals without damage, preventing leaks and ensuring proper function. A potential caveat is that the tool's effectiveness relies on selecting the correct size for the specific bore and seal dimensions.
| Model Part Number | 8847 |
|---|---|
| Brand | Laser |
The set covers bore diameters from 22mm to 165mm, with three specific sizes within the kit: 22-40mm, 40-70mm, and 70-165mm.
The tool sizes are designed for maximum seal cross-sections of 6mm (small size), 8mm (medium size), and 10mm (large size).
No, this tool set is specifically designed for the installation of *internal* O-ring seals.
It is ideal for automotive, marine, HGV (Heavy Goods Vehicle), and agricultural engineering applications.
Match the bore diameter you are working with to the range specified for each tool size. Also, consider the cross-sectional thickness of the O-ring seal itself.
Clean the tools with a cloth after each use and store them in a dry place to prevent rust and maintain their condition.
Verify you are using the correct size tool for the bore diameter and seal cross-section. Ensure the seal and bore are clean and appropriately lubricated.
The selected tool size may be incorrect, or excessive force was applied. Re-examine the tool size and installation technique. Check the seal for nicks or tears before attempting re-installation with the correct size and method.
Confirm that the seal is a standard O-ring type and that its dimensions fall within the specified range for the tool size (e.g., max cross-section of 6mm, 8mm, or 10mm).
Setup: The tool set requires no assembly. Select the appropriate size tool based on the bore diameter and the seal's cross-section. Ensure the seal is clean and lightly lubricated with a compatible fluid before installation.
Compatibility: The set is designed for internal seal installations in bore diameters ranging from 22mm to 165mm. It is compatible with O-ring seals up to 6mm, 8mm, and 10mm cross-sections, depending on the tool size used.
Care: After use, clean the tools with a lint-free cloth to remove any residual grease or debris. Store the set in a dry environment, preferably in its original packaging or a dedicated tool case, to prevent corrosion and damage. Avoid using abrasive cleaners or solvents that could degrade the tool's finish.
