Best current price£71.95from B&Q
Shopping.co.uk recommended and popular offers
B&Q£71.95Visit shop - Stonecare4UBlock Paving Sealer Satin (10L)Protects Block PavingSolvent-FreeBlock Paving SealantReduces Organic Growth
Visit shop4 offers from £71.95
View price history by clicking the chart icon.
The StoneCare4U Essential Satin Finish Block Paving Sealer is designed for homeowners and DIY enthusiasts looking to protect and enhance their outdoor paved surfaces. Its key benefit is providing durable protection against stains and fading while adding an attractive satin finish. A potential caveat is the need for careful surface preparation and a test application to ensure suitability and prevent undesirable color changes. This high-performance, VOC-free sealer is suitable for various natural stones including block pavers, sandstone, limestone, and slate, offering stain protection and color intensification with an easy-to-apply H2O formula.
| Brand | StoneCare4U |
|---|
This sealer is suitable for porous natural stones like block pavers, sandstone, limestone, and slate, as well as engineered concrete. It can also be used on internal surfaces. It is not recommended for highly polished stone or ceramic glazed surfaces.
Coverage is up to 15m² per litre per coat when applied undiluted. A 5L pack can cover up to 75m² per coat, depending on the surface porosity and application method.
You can use a low-pressure sprayer, micro-fibre mop, paintbrush, or soft cloth. Apply thinly and evenly, avoiding puddles and application marks. Ensure the surface is clean and dry beforehand.
Allow 45 to 60 minutes drying time between coats. Ensure good ventilation and favorable weather conditions during application and drying.
No, do not dilute the product. It is formulated to be applied undiluted for best performance and finish.
Clean sealed areas with a mild, pH-neutral cleaner or a very low concentration of an outdoor cleaner. Avoid using harsh or abrasive cleaning agents.
The ideal application temperature range is between 13°C and 23°C.
Always perform a small test application in an inconspicuous area before sealing the entire surface. This will help you determine suitability and check for any undesirable color changes.
Ensure the sealer was applied thinly and evenly. If marks are present, they may be addressed with a light sanding once fully cured, or by applying another thin, even coat in the opposite direction, taking care to blend edges. Ensure adequate drying time between coats.
The surface may not be porous enough, or it may have an existing sealant. Re-check compatibility and ensure the surface is clean and free of contaminants. A second coat might be necessary on highly absorbent surfaces, applied within the recommended timeframe.
This indicates the product is not suitable for the specific stone or the test patch was not representative. Unfortunately, once applied and cured, significant color changes can be difficult to reverse. For future applications, always perform a thorough test on a hidden area.
This can occur if the product was applied too thickly, in humid conditions, or if the temperature was outside the recommended range. Ensure good ventilation and allow more drying time. If the issue persists, consider applying a very thin, additional coat to help cure the layer beneath.
Preparation is key for optimal performance. Ensure the surface is completely clean and dry before application. Remove all loose debris, dirt, and grime. Wear appropriate safety gear, including gloves, protective eyewear, a face mask, and clothing.
Compatibility:
This sealer is suitable for outdoor natural stone such as block pavers, sandstone, limestone, and slate, as well as engineered concrete. It is also suitable for internal surfaces. It is NOT recommended for highly polished stone and ceramic glazed surfaces. Always perform a small test application in an inconspicuous area to confirm suitability and assess potential color changes before proceeding with the entire surface. Do not dilute the product.
Application:
Apply the sealer thinly and evenly using a low-pressure sprayer, micro-fibre mop, paintbrush, or soft cloth. Avoid leaving application marks or allowing the product to puddle. Aim for an application temperature between 13°C and 23°C, and ensure favorable weather conditions.
Coats:
Allow 45 to 60 minutes drying time between coats. Apply the second coat in the opposite direction to the first for a consistent finish. Additional coats can be applied if a deeper finish is desired.
Care:
Clean sealed areas using a mild, pH-neutral cleaner or a very diluted outdoor cleaner. Avoid harsh or abrasive cleaning agents, as these can damage the treated surface.
