Hollyland LARK MAX 2 Combo 4-Person Version - Grey

Typically, pairing is done by placing the transmitters into the charging case along with the receiver, or by following a specific pairing sequence indicated in the user manual, often involving button presses or menu selections.

32-bit float recording provides a much wider dynamic range, meaning your audio can capture very quiet and very loud sounds simultaneously without clipping or distortion. This offers significant flexibility during post-production editing.

Yes, the included USB-C receiver is designed to connect directly to smartphones and tablets that have a USB-C port, allowing for high-quality audio recording.

The LARK MAX 2 Combo 4-Person Version includes four clip-on transmitters, allowing you to capture audio from up to four different individuals at the same time.

The system offers a wireless transmission range of up to 340 meters (approximately 1115 feet) in an unobstructed, line-of-sight environment.

Yes, the clip-on transmitters feature built-in omnidirectional microphones, and they also support connection to external lavalier microphones if preferred.

The transmitters and receivers offer significant battery life for recording, and the included charging case provides up to 14 hours of additional backup recording time, ensuring you can operate throughout a full day of shooting.

Ensure transmitters are powered on and paired with receivers. Check that receiver volume levels are not muted or set too low. Verify the correct input source is selected on your camera or recording device.

Move closer to the receiver, or reposition the transmitters and receivers to ensure a clear line of sight. Check for potential interference sources (e.g., Wi-Fi routers, other wireless devices) and try changing the system's operating channel if possible.

Ensure the AI noise cancellation feature is enabled on the receiver or transmitter (depending on model). Verify that the microphone on the transmitter is not obstructed and is positioned correctly relative to the sound source.

Verify that the USB-C cables are securely connected to both the power source and the devices. Try a different USB-C cable or power adapter. Ensure the charging contacts on the devices and case are clean.