National Skirting Skirting Board - Ogee - White

The Ogee design features unique inward and outward curves that provide visual contrast and add a decorative, elegant touch to interior spaces, working well with both traditional and modern styles.

The skirting board is made from moisture-resistant MDF, making it more durable than standard MDF. It can be suitable for bathrooms with good ventilation, but it is not waterproof and should not be exposed to constant high humidity or direct water.

Yes, the white primed finish is specifically designed to be painted over. It provides a good base for most types of interior paint or gloss, allowing you to match it to your decor.

Each board measures 195mm in height, 3040mm in length, and 18mm in thickness.

Clean the skirting board with a soft, slightly damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the finish.

For clean cuts, it is recommended to use a fine-toothed saw or a powered mitre saw with a blade specifically designed for cutting MDF to prevent splintering.

This specific product is described as white primed. Please refer to the product listing for other available colours or finishes.

Ensure the wall surface is clean, dry, and free from dust or grease. Use an appropriate adhesive for MDF and apply it evenly. Check if any temporary supports are needed while the adhesive cures.

Ensure the wall and floor are reasonably level. For minor imperfections, use a suitable filler after installation. For larger gaps, consider shimming behind the board or re-fitting.

Use a sharp, fine-toothed saw blade specifically designed for MDF. Ensure the board is securely supported during cutting and use a slow, steady cutting motion.

Ensure the surface was properly sanded after filling and before painting. Apply paint in thin, even coats, allowing adequate drying time between coats. Use a high-quality primer and paint.