Sanding Sheet Metal Wood - Makita - 93 X 230mm

A 60-grit sandpaper is considered coarse and is primarily used for heavy sanding tasks such as removing old paint or varnish, stripping finishes, and roughing up surfaces to prepare them for further work.

Yes, but with caution. Its coarseness can quickly remove material, but it may also easily gouge or leave deep scratches on soft woods. It is best used for initial rough shaping or stripping, followed by finer grits.

This 60-grit sheet with white aluminum oxide is particularly effective on wood, metal, and for removing paints and varnishes.

The lower the grit number, the coarser the sandpaper. A 60-grit is considered coarse, suitable for aggressive material removal, while higher grit numbers (e.g., 220, 320) are finer and used for smoothing.

Yes, absolutely. If you need a smooth finish, you must follow up the aggressive sanding with 80-120 grit for medium sanding, and then 150-240 grit or higher for fine sanding.

Sanding sheets are generally disposable. While you can try to brush off loose dust, once the abrasive particles become dull or clogged with material, it's most effective to replace the sheet for optimal performance.

Ensure the hook-and-loop or clamping system on your sander is clean and functioning correctly. Make sure the sheet is aligned properly and firmly secured.

The abrasive may be dull or clogged with debris. Check for excessive dust buildup on the sheet. For heavy clogging, replace the sheet. Ensure your sander is operating at the correct speed and pressure.

Verify that the holes on the sanding sheet align with the dust extraction holes on your sander's pad. Ensure the dust bag or vacuum attachment is properly connected and not full. Check for blockages in the sander's dust port.