Self-Adhesive Vinyl Film - Granite Grey - 67.5cm x 3m

Dc fix self-adhesive vinyl wraps are ideal for updating kitchen worktops and other surfaces around...

Best current price£19.97from B&Q

All Offers

2 offers from £19.97 - £22.99

View price history by clicking the chart icon.

B&QB&Q - Granite Grey 67.5Cm X 3M Self-Adhesive Vinyl Wrap For Doors And Worktops
Free delivery in 1–3 days
£19.97
Visit shop
Robert Dyasd-c-fix Granite Grey Self-Adhesive Vinyl Wrap 67.5cm x 3m
£2.95 delivery
£22.99
Visit shop

Product Information

Full details

This d-c-fix self-adhesive vinyl film in Granite Grey is perfect for DIY enthusiasts and renters looking to refresh kitchen worktops, tabletops, and furniture on a budget. Its key benefit is providing a durable, wipe-clean surface with a realistic granite effect without the cost and hassle of replacement. A caveat to keep in mind is its heat resistance limit of 70°C, requiring the use of worktop savers for hot pans.

All features

Model Part Number200-8205-3
Brandd-c-fix

Extended Product Information

FAQs

Can I use this on a textured surface?

The film adheres best to smooth, flat surfaces. Textured surfaces may result in a less durable bond and visible texture underneath.

What is the heat resistance of the vinyl?

The d-c-fix vinyl is heat resistant up to 70°C. It is recommended to use worktop savers for hot pans and trivets for hot dishes.

How do I clean the vinyl film?

Wipe the surface with a damp cloth and mild detergent. Dry immediately. Avoid abrasive cleaners or scouring pads.

Is this product suitable for outdoor use?

This product is designed for indoor use. Outdoor exposure to varying temperatures and UV rays can affect its durability and appearance.

Can I reapply the vinyl if I make a mistake?

Yes, the water-based adhesive allows you to lift and reposition the film during application if you make a mistake. For removal after it has bonded, a hairdryer can help soften the adhesive.

Do I need to seal around my hob or sink?

Yes, it is highly recommended to seal around sinks and hobs with a silicone sealant. This prevents water and dirt from getting underneath the vinyl edges, which could cause it to lift.

What tools do I need for application?

You will need a utility cutter or sharp knife for trimming, and a felt edge smoother or squeegee to help apply the film smoothly and remove air bubbles. A hairdryer on a low setting is useful for curves and removal.

Troubleshooting

Air bubbles or creases during application

Gently lift the film using the repositionable adhesive and reapply, smoothing with a felt edge smoother. A hairdryer on a low setting can help if the adhesive has set.

Film not sticking properly

Ensure the surface is thoroughly clean, dry, and free from dust or grease. For very smooth or shiny surfaces, a light mist of water can help the film glide and be repositioned before it adheres.

Water getting under the edges

This can lift the vinyl. Ensure edges, especially around sinks and hobs, are sealed with a suitable silicone sealant.

Difficulty removing the film

Gently warm the film with a hairdryer on a low setting. This softens the adhesive, making removal easier. Peel slowly and steadily.

Pros and Cons

Pros

  • Budget-friendly alternative to surface replacement.
  • Easy to apply with repositionable adhesive.
  • Durable and easy to maintain with a simple wipe-clean surface.
  • Fully removable, making it suitable for renters.
  • Provides a realistic and updated aesthetic.
  • Custom lengths available, reducing waste.

Cons

  • Heat resistance limited to 70°C, requiring precautions for hot items.
  • Requires careful sealing around sinks and hobs to prevent water ingress.
  • Not a factory-sealed retail roll, may differ from standard packaging.
  • Requires additional tools like a felt edge smoother and utility cutter for best results.
  • May require practice for a perfectly seamless finish on complex surfaces.

Setup, Compatibility & Care

Setup: Ensure the surface is clean, dry, and smooth before application. Use a ruler and the cutting grid on the reverse of the film for accurate sizing. Peel back a small section of the backing paper and carefully align the film. Slowly smooth the film onto the surface using a felt edge smoother, working from the center outwards to eliminate air bubbles. The water-based adhesive allows for repositioning if mistakes are made. Use a sharp utility cutter for trimming excess material.

Compatibility: The film adheres best to flat, smooth surfaces. It's ideal for kitchen worktops, tabletops, desks, cabinets, and other furniture.

Care: Wipe clean with a damp cloth. Address spills immediately to prevent staining. Avoid using abrasive cleaners. For hot pans or direct cutting, always use a worktop saver or cutting board. Seal edges around sinks and hobs with a silicone sealant to prevent water from seeping underneath and lifting the vinyl.

Price History

DatePrice
Visit shop