Canon ET-87 Lens Hood - Canon

The Canon ET-87 Lens Hood is specifically designed for the Canon EF 70-200mm f/2.8L IS II USM lens.

A lens hood improves image quality by blocking stray light from entering the lens, which prevents flare and ghosting, thereby increasing contrast and color saturation.

No, the ET-87 lens hood is custom-fitted for the Canon EF 70-200mm f/2.8L IS II USM lens and is not compatible with other lens models.

Yes, the lens hood provides a degree of physical protection against accidental knocks and bumps to the front element of the lens.

Clean the lens hood using a soft, damp cloth. Avoid using abrasive materials or chemical cleaners.

Yes, the ET-87 lens hood can be reversed and attached to the front of the lens for more compact storage in your camera bag.

The ET-87 Lens Hood is made of durable plastic.

Ensure you are using the correct lens model (Canon EF 70-200mm f/2.8L IS II USM). Verify that the mounting bayonet on the lens and the hood are clean and free of debris. Realign and twist gently until it locks.

Double-check that the hood has been twisted fully clockwise until it is firmly locked in place. If it continues to feel loose, there may be an issue with the mounting mechanism on either the lens or the hood.

The ET-87 hood should not cause vignetting on the EF 70-200mm f/2.8L IS II USM lens when used at any focal length. Ensure the hood is correctly attached and fully locked. If vignetting persists, check if the lens is compatible and try shooting at the longest focal length.