Best current price£22.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£22.99Visit shop B&Q - Shed & Fence One Coat Protection Wood Treatment 5L- Slate Grey
Visit shop1 offer from £22.99
View price history by clicking the chart icon.
This guide is designed for homeowners and DIY enthusiasts looking to protect and enhance their outdoor wooden structures with Bird Brand Shed & Fence One Coat Protection in Slate Grey. The product offers a modern aesthetic with its semi-opaque slate grey finish while providing robust, long-lasting protection against the elements. A key benefit is the one-coat application, simplifying the process and saving time. However, it's essential to ensure proper surface preparation for optimal results.
| Colour | Grey |
|---|---|
| Model Part Number | Gndie/Ca4003 |
| Brand | Bird Brand |
The product becomes water repellent in approximately 1 hour, but allow sufficient time for full drying, as specified on the product label, before exposing it to heavy use or the elements.
No, the surface must be clean and free from any previous coatings for the product to adhere properly. Remove any existing paint or stain first.
Clean brushes, rollers, and spray equipment immediately after use with the appropriate solvent, as recommended on the product label.
One coat is usually sufficient, but very porous wood may require a second coat for optimal protection and color saturation.
The coverage rate can vary depending on the wood type and surface porosity. Refer to the product label for specific coverage information.
Yes, it is suitable for decking, fences, sheds and other exterior wood structures.
The color is a modern, semi-opaque grey color, which enhances the natural wood grain.
Ensure the product is thoroughly mixed before and during application. Apply an even coat and avoid over-applying in certain areas. If necessary, apply a second coat after the first has dried.
Ensure the product has fully dried. Check the weather forecast and avoid application if rain is expected within 1 hour. Make sure the wood has been properly prepared.
The surface may not have been properly prepared or the previous coating was incompatible. Remove the existing finish by sanding or using a paint stripper before re-applying the Bird Brand product.
