Best current price£11.32from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£11.32Visit shop Draper 60964 Ratcheting Tie Down Straps 3.5M X 25Mm 250Kg (2 Piece) Each
Visit shop
B&Q£16.23Visit shop B&Q - Ratcheting Tie Down Straps3.5M X 25mm250Kg (2 Piece) 60964
Visit shop12 offers from £11.32 - £34.99
View price history by clicking the chart icon.
These Draper 3.5m x 25mm ratcheting tie-down straps are designed for securing loads up to 250kg safely during transport. Ideal for DIY enthusiasts and professionals needing reliable cargo restraint, their primary benefit is the secure and adjustable fastening mechanism. A potential caveat is the weight limit, which requires users to understand their load's capacity. Key features include durable polyester webbing, integrated 'S' hooks, and a simple ratcheting system for tensioning.
| Model Part Number | 60964 |
|---|---|
| Brand | Draper |
Each strap has a Safe Working Load (SWL) of 250kg. Always ensure the total weight of the load being secured does not exceed this limit per strap.
The Safe Working Load (SWL) is the maximum load the strap should carry in normal use, typically with a safety factor applied. The breaking strain is the point at which the strap is expected to fail, which is significantly higher than the SWL.
No, these straps are designed for tie-down purposes only and are not suitable for lifting loads.
Clean with mild soap and water using a damp cloth. Allow the straps to air dry completely before use or storage. Do not use harsh chemicals or solvents.
If the webbing shows signs of fraying, cuts, or other damage, the strap should be retired from service immediately to prevent failure and ensure safety.
Yes, the polyester webbing is designed to withstand general outdoor conditions. However, prolonged exposure to direct sunlight and extreme weather may degrade the material over time. Proper care and storage will extend their lifespan.
Check for dirt or debris within the ratchet mechanism. Clean gently with a dry brush. If the issue persists, a light application of a dry lubricant might help, but ensure it doesn't contaminate the webbing.
Ensure the webbing is properly threaded through the ratchet mechanism and that the ratchet pawls are fully engaged. Check that the webbing is not twisted, which can impede the ratchet's function.
These straps are designed for specific anchor points. Ensure you are using compatible tie-down points that are designed to hold the load securely. If the anchor point is too small or too large, alternative tie-down methods may be necessary.
Setup: To use, thread the webbing through the ratchet mechanism, attach one 'S' hook to an anchor point, then pull the free end of the webbing to remove slack. Operate the ratchet lever up and down to tighten the strap until the desired tension is achieved. Attach the second 'S' hook to another suitable anchor point. To release, fully lift the lower pawl of the ratchet mechanism.
Compatibility: These straps are compatible with any secure anchor points that can accept an 'S' hook, such as tie-down rings on trailers, roof racks, or cargo beds. Ensure anchor points are strong enough to withstand the tension applied and the load's weight.
Care: Inspect straps for wear and tear before each use. Clean the webbing with mild soap and water if it becomes dirty, and allow it to air dry completely. Store straps in a clean, dry place away from direct sunlight and harsh chemicals. Avoid prolonged exposure to extreme temperatures. Do not use if webbing is frayed, cut, or otherwise damaged.
