Best current price£10.74from eBay
Shopping.co.uk recommended and popular offers
eBay£10.74Visit shop Celsus ISO BMW & Mini Quadlock Fitment (2001-2010) - AIS2103
Visit shop5 offers from £10.74 - £13.83
View price history by clicking the chart icon.
The Celsus AIS2103 is a specialized wiring solution designed for car audio enthusiasts looking to install an aftermarket stereo in BMW, Mini, or Land Rover vehicles featuring a Quadlock connector. It acts as a seamless bridge between the vehicle's proprietary wiring and universal ISO standards, allowing for a straightforward, plug-and-play installation without cutting into the original loom; however, users should verify their specific vehicle build date and head unit requirements to ensure full compatibility with steering wheel control adapters.
| Model Part Number | AIS2103 |
|---|---|
| Brand | Celsus |
No, this is a basic wiring harness. You will need a separate Steering Wheel Control (SWC) interface to retain those functions.
The AIS2103 is specified for 2001-2010 models. Compatibility for 2011 models may vary; please check your factory connector type before purchase.
No, the Celsus AIS2103 only provides power and speaker connections. You may need a separate antenna adapter for radio reception.
In many BMW/Mini applications, a switched ignition source is not present in the original Quadlock. You may need to run a separate ignition feed to your stereo.
The harness is approximately 17.5cm long.
Ensure all pins are fully seated in the Quadlock connector and check the vehicle's accessory fuse.
Inspect the ISO pins on both ends of the harness to ensure no terminals have been pushed out of the plastic housing.
Verify that the permanent 12V and switched ignition wires are correctly matched to the head unit requirements.
To install, ensure your vehicle is completely powered down and the key is removed from the ignition. Carefully remove the dash trim to expose the stereo and disconnect the original Quadlock harness. Insert the male end of the AIS2103 into the vehicle's female connector, then connect the ISO output to your new stereo's harness. This adapter is compatible with most 2001-2010 BMW, Mini, and Land Rover vehicles. For care, ensure the cable is routed away from sharp metal edges inside the dashboard to prevent wire insulation damage. If you notice power fluctuations, verify that the harness is seated firmly and that the pin alignment is not obstructed by debris.
