Best current price£6.99from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£6.99Visit shop Petrolscooter Innertube 12 1/2 X 2.25 / 2.50 Bent Valve Out N About Nipper Pushchair Pram Tube
Visit shop1 offer from £6.99
View price history by clicking the chart icon.
This PetrolScooter Innertube is designed for Out N About Nipper Pushchairs with 8-inch wheels (or 12.5-inch with tyre). It offers a reliable replacement for damaged or worn-out inner tubes, ensuring your pushchair remains functional. A key benefit is its Schrader (car type) valve for easy inflation, though it's specifically sized and may not fit other brands or tyre sizes.
| Model Part Number | 32462 |
|---|---|
| Brand | PetrolScooter |
This innertube is designed for 8-inch wheel rims. The tyre size it fits is 12 1/2 x 2.25 / 2.50, which is typically used on these 8-inch rims for pushchairs like the Out N About Nipper.
It has a Schrader valve, which is the same type used on most car tyres and many bicycles. This allows for easy inflation with standard pumps.
While it might physically fit if the tyre size matches, it is specifically designed and recommended for Out N About Nipper Pushchairs. Using it on other brands is at your own risk, and compatibility is not guaranteed.
Check the sidewall of your existing tyre. It should be marked with a size similar to '12.5 x 2.25' or '12.5 x 2.50' to be compatible with this innertube.
The valve stem on this innertube is angled or bent, which can make it easier to access and connect a pump for inflation, especially when the tyre is mounted on the wheel.
No, this product is for the innertube only. The outer tyre is a separate component.
The inner diameter is approximately 196 mm (7.72 inches) and the outer diameter is approximately 294 mm (11.57 inches).
Ensure the valve cap is removed and the pump is securely attached to the Schrader valve. Check if the valve core is clear of debris.
Check for punctures in the innertube or the outer tyre. Inspect the rim for sharp edges or damage that could be causing a slow leak. Ensure the valve stem is properly seated and not damaged.
Ensure the innertube is only slightly inflated to give it shape, not fully inflated. Work the tyre bead onto the rim systematically. Use tyre levers with care, ensuring not to pinch the innertube.
Deflate the tyre slightly and ensure the tyre bead is evenly seated all around the rim. Re-inflate slowly and check seating as you go.
Setup:
Compatibility:
Care:
