Best current price£14.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£14.99Visit shop B&Q - Pla 3D Printer Filament 1.75mm 1Kg Candy Dandy Pink Spool Fdm
Visit shop2 offers from £14.99 - £15.90
View price history by clicking the chart icon.
The ATEK Candy Dandy Pink PLA filament is an ideal choice for makers and hobbyists seeking a vibrant, playful color for decorative prints, educational projects, or prototypes on standard FDM 3D printers. This 1kg spool offers excellent dimensional stability and low-warp properties, making it user-friendly for both beginners and experienced printers; however, as with all PLA, users should be mindful that it is not heat-resistant and may soften or deform in high-temperature environments.
| Brand | ATEK |
|---|
While it varies by printer, most users get optimal results between 190°C and 220°C.
A heated bed is recommended for better adhesion, though not strictly required for small, simple prints.
Yes, PLA is derived from renewable resources and is considered biodegradable under industrial composting conditions.
Store it in an airtight container with desiccant packs to prevent moisture absorption.
No, this filament is specifically 1.75mm in diameter and will not feed correctly into a 3mm (2.85mm) printer.
Adjust your retraction settings in your slicer software or slightly lower your printing temperature.
Clean the build plate with isopropyl alcohol and ensure the first layer height is properly calibrated.
The filament has absorbed moisture; dry it in a filament dryer or a food dehydrator at a low temperature.
To begin using the ATEK Candy Dandy Pink PLA, load the spool onto your printer's mount and feed the filament through your extruder system. Most users find success printing within the standard PLA temperature range of 190°C to 220°C. Ensure your build surface is clean and level before starting.
Compatibility: This filament is compatible with any FDM 3D printer that utilizes 1.75mm filament.
Care: To maintain the best print quality, keep the filament in a sealed container or dry box when not in use. PLA is hygroscopic and can absorb moisture over time, which may lead to popping or stringing during the printing process.
