Volden Sealant - White
Best current price£5.30from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£5.30Visit shop B&Q - Plus White Acrylic-Based General-Purpose Sealant280Ml
Visit shopB&Q£5.30Visit shop One Offer
1 offer from £5.30
View price history by clicking the chart icon.
B&QB&Q - Plus White Acrylic-Based General-Purpose Sealant280Ml
Free delivery in 1–3 days
£5.30
Visit shop
Product Information
Full details
The Volden Plus White Acrylic-based General-purpose Sealant is designed for homeowners and DIY enthusiasts tackling everyday sealing and gap-filling tasks. Its key benefit is improved flexibility and adhesion, making it suitable for more demanding applications than standard sealants, all while providing a clean, crisp white finish. A minor caveat is its acrylic base, which may limit its use in areas exposed to constant moisture or extreme temperatures compared to silicone alternatives.
All features
| Colour | White |
|---|---|
| Brand | Volden |
Extended Product Information
FAQs
Can this sealant be painted over?
Yes, the Volden Plus White Sealant can be painted over once it has fully cured. Water-based paints are recommended for best results.
How long does it take to cure?
Curing times can vary based on temperature, humidity, and bead size. Generally, it will be tack-free within an hour and fully cured within 24-48 hours for most typical applications. Avoid disturbing the sealed area until fully cured.
Is this sealant suitable for exterior use?
This sealant is primarily formulated for interior use. While it may offer some resistance to weather, it is not designed for prolonged exterior exposure or applications requiring high durability against elements.
Can I use this in a bathroom or kitchen where there is moisture?
It is suitable for light moisture areas like a kitchen backsplash, but not recommended for areas with constant water exposure such as shower stalls or around bathtubs, where a silicone sealant would be more appropriate.
How should I store unused sealant?
Store the sealant in its original cartridge in a cool, dry place, away from extreme temperatures. Ensure the nozzle is sealed or the cartridge is properly capped to prevent drying out.
What is the shelf life of this sealant?
Unopened cartridges typically have a shelf life of 12-18 months when stored under recommended conditions (cool, dry place). Once opened, the sealant will start to cure and its usable life is significantly reduced.
Troubleshooting
Sealant is not extruding from the tube.
Ensure the cartridge's inner seal has been punctured and that the caulking gun is properly engaged with the cartridge.
Sealant is stringy or difficult to control during application.
Ensure the sealant is at room temperature. If it's too cold, it will be stiffer. Cut the nozzle opening to an appropriate size for the gap.
Sealant is not adhering to the surface.
Ensure the surface is clean, dry, and free from dust, grease, or old sealant. For non-porous surfaces, consider a primer if adhesion issues persist.
Sealant cracked after curing.
This may indicate the joint moved excessively after application or that the sealant was applied too thinly. Ensure the sealant is applied generously enough to accommodate joint movement. Reapply if necessary.
Pros and Cons
Pros
- Offers enhanced flexibility for dynamic joints.
- Provides good adhesion to a variety of interior building materials.
- Leaves a clean, professional-looking white finish.
- Suitable for a wide range of common household sealing tasks.
- Easy to apply for DIY users.
Cons
- Not ideal for constant water exposure or high-humidity areas.
- May not withstand extreme temperature fluctuations as well as silicone sealants.
- Requires proper surface preparation for optimal adhesion.
- Dries to a matte finish, which may not suit all aesthetic preferences.
Setup, Compatibility & Care
Setup:
- Ensure the sealant is at room temperature for optimal application.
- Prepare your surface: it must be clean, dry, and free from dust, grease, and loose material. Sanding lightly may improve adhesion on glossy surfaces.
- Cut the tip of the sealant nozzle at a 45-degree angle to create an opening appropriate for the gap size.
- Puncture the inner seal of the cartridge.
- Insert the cartridge into a standard caulking gun.
- Apply a continuous bead of sealant by applying steady pressure to the caulking gun trigger.
Compatibility:
- Suitable for use on painted surfaces, wood, plaster, concrete, and some plastics.
- Not recommended for use in areas of continuous water immersion or high humidity, such as shower stalls or bathtubs, where a silicone sealant might be more appropriate.
- Can be painted over once fully cured. Use water-based paints for best results.
Care:
- Clean up uncured sealant immediately with a damp cloth and water.
- Remove any excess uncured sealant from tools before it dries.
- Once cured, the sealant is generally difficult to remove without scraping or cutting.