Hose Clamp Set - 12pc - 6mm - 51mm - Toolzone
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Toolzone 12pc Hose Clamp Set is designed for automotive technicians, DIY enthusiasts, and home gardeners who require a reliable solution for securing pipes and hoses. This comprehensive kit provides the versatility needed to manage various fluid-carrying systems, offering a secure, rust-resistant hold for silicone, rubber, and plastic materials. While the set is perfect for general maintenance and repairs, users should note that these clamps are intended for standard pressure applications and may not be suitable for extreme-duty industrial high-pressure environments.
All features
| Brand | Toolzone |
|---|
Extended Product Information
FAQs
What sizes are included in this set?
The set includes 6-16mm, 16-25mm, 18-32mm, and 27-51mm diameter clamps.
Can I use these on silicone radiator hoses?
Yes, these clamps are suitable for silicone hoses, provided you do not overtighten them, which could damage the soft silicone material.
Are these stainless steel?
They are designed for standard durability, but for harsh marine or corrosive environments, check for specific material ratings.
How do I tighten these?
These clamps use a standard worm gear mechanism that can be tightened using a flathead screwdriver or a small socket driver.
Can these be reused?
Yes, these clamps are designed to be loosened and reused multiple times if the threads remain in good condition.
What is the maximum pressure these can handle?
These are designed for general-purpose automotive and garden use; they are not rated for high-pressure industrial hydraulic systems.
Troubleshooting
Clamp slips after installation
Ensure the hose is fully pushed over the connector barb and that you have selected the correct size range for the hose outer diameter.
Screw is difficult to turn
Check the worm gear track for debris or grit; if present, clean with a brush and apply a small amount of lubricant.
Clamp creates a leak
Verify that the clamp is positioned behind the ridge or barb of the connection point and re-tighten the screw slightly.
Pros and Cons
Pros
- Comprehensive size range in a single set
- Suitable for automotive and garden applications
- Easy to tighten with standard hand tools
- Provides a secure, leak-free hold for various hose materials
Cons
- Not intended for high-pressure industrial systems
- Assorted sizes might not cover specialized non-standard pipe diameters
- Requires manual adjustment which can be tedious for high-volume tasks
Setup, Compatibility & Care
To install, select the smallest clamp that can comfortably slide over the hose. If the clamp is too loose, it will not provide enough pressure to seal; if it is too tight, it will be difficult to position. Always keep the worm gear housing clean and free of debris to ensure smooth rotation during tightening.
Compatibility is broad, covering most automotive rubber hoses and household plastic piping. To maintain the integrity of the clamps, avoid overtightening, as this can strip the screw threads or damage the hose material. If used in an environment exposed to saltwater or harsh chemicals, periodically check the clamps for signs of oxidation or corrosion.