Ideal for use in cloakrooms and kitchens in offices, shops, student accommodation and domestic pre...Ideal for use in cloakrooms and kitchens in offices, shops, student accommodation and domestic premises which have been extended and there is no central hot water system near by. One unit located under the kitchen sink is often used to supply hot water for light dishwashing in the kitchen sink and handwashing in the cloakroom basin. The Speedflow unvented water heater from Hyco can be installed either above or below the sink. It can be mounted on the wall or it can be floor mounted. It is ideal for dishwashing and handwashing in a sink. The capacity is 5 litres and the output is 2kW. It is available in many other capacities and different outputs. UKCA and CE Approved. The Hyco Speedflow 2000W (2.0kW) Unvented Undersink 5L Water Heater (SF05K) is an efficient solution for providing instant hot water for up to one basin, making it ideal for cloakrooms and kitchens in various settings such as offices, shops, and student accommodations. With mains pressure flow rates and compatibility with regular taps, including mixers, this unit features a durable glass-lined steel tank and an easy-to-clean high impact plastic outer casing. It operates at a minimum water pressure of 0.5 bar and a maximum of 4.2 bar, and comes equipped with an external temperature control that includes a frost protection setting. The SF05K is particularly effective in areas lacking a central hot water system, supplying hot water for light dishwashing and handwashing tasks.
The Hyco Speedflow 5 Litre Water Heater (SF05K) is designed for providing instant hot water to single-basin applications, ideal for locations without a central hot water system like cloakrooms and kitchens. This unit offers mains pressure flow rates and is compatible with regular taps, including mixers, ensuring ease of use. However, it's designed for light-duty use and may not be suitable for high-demand applications.
All features
Model Part Number
SF05K
Brand
Hyco
Extended Product Information
FAQs
What is the capacity of the water heater?
The Hyco Speedflow SF05K has a 5-litre capacity.
What is the power output?
The power output is 2.0kW.
What type of taps are compatible?
The unit is compatible with regular taps and mixer taps.
What is the minimum water pressure required?
The minimum water pressure required is 0.5 bar.
Where can I install the water heater?
It can be installed above or below the sink, and it can be wall-mounted or floor-mounted.
Does it have a frost protection setting?
Yes, it has an external temperature control with a frost protection setting.
What is the outer casing made of?
The outer casing is made of high-impact plastic.
Troubleshooting
Water is not hot.
Check the power supply to the unit, ensure the temperature setting is correct, and check for any tripped circuit breakers.
Low water flow.
Check the water inlet for blockages and ensure adequate water pressure (0.5 bar minimum).
Unit is leaking.
Inspect all water connections and tighten if necessary. If the leak persists, contact a qualified plumber.
No power to the unit.
Check the power cord connection and the circuit breaker. Consult an electrician if necessary.
Water temperature fluctuates.
Check for consistent water pressure and that the temperature control is set correctly.
Pros and Cons
Pros
Provides instant hot water.
Compact size for easy installation.
Compatible with various tap types.
Durable construction with a glass-lined steel tank.
Features frost protection.
Efficient 2.0kW output
Cons
Limited capacity (5 litres) suitable for single basin use.
Not ideal for high-demand applications.
Requires a minimum water pressure of 0.5 bar.
Installation may require professional assistance.
May not be suitable for all household needs.
Heating capacity is limited to 2kW
Setup, Compatibility & Care
Setup:
Installation: The unit can be installed above or below the sink and can be wall-mounted or floor-mounted.
Water Connections: Connect the unit to the cold water supply and the hot water tap. Ensure all connections are secure and leak-free.
Electrical Connection: The unit requires a 2kW power supply. Consult a qualified electrician for proper wiring.
Temperature Setting: Adjust the external temperature control to your desired setting.
Compatibility:
Taps: Compatible with regular taps and mixer taps.
Water Pressure: Operates between 0.5 bar and 4.2 bar water pressure.
Care:
Cleaning: Wipe the outer casing with a damp cloth. Do not use abrasive cleaners.
Maintenance: Periodically check for leaks and ensure the temperature control is functioning correctly. It's recommended to have the unit inspected by a professional every few years.