Best current price£54.99from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£54.99Visit shop Natural Oak Decking Oil 5L | Deep Penetrating Wood Treatment 5061097015129
Visit shop1 offer from £54.99
View price history by clicking the chart icon.
This Ronseal Ultimate Protection Decking Oil in Natural Oak is designed for homeowners looking to nourish, protect, and enhance their wooden decking. Its key benefit is offering superior, long-lasting defence that lasts up to twice as long as standard decking oils. A potential caveat for some users is its water-based Linseed Oil technology, which may require specific preparation steps compared to solvent-based alternatives. The oil penetrates deeply to prevent greying and splitting, restores natural wood tones, and provides a weather-resistant finish.
| Colour | Brown |
|---|---|
| Brand | Caprican |
Due to its advanced formula, this oil lasts up to twice as long as standard decking oils. Typically, reapplication is recommended every 1-2 years, depending on weather exposure and foot traffic, to maintain optimal protection and appearance.
It is best to remove any existing stain or sealant completely before applying this oil. Sanding may be required to ensure a clean, bare wood surface for optimal penetration and adhesion.
Drying times can be extended in humid or cold conditions. While it is rainproof in 90 minutes and touch dry in 4 hours, allow for longer drying periods if the temperature is low or humidity is high before recoating or allowing heavy foot traffic.
While designed for decking, its protective and nourishing qualities may also benefit garden furniture made from similar wood types. Ensure the furniture is clean and dry before application.
Clean application tools and any spills immediately after use with water. Soap and water can be used for more stubborn residue on tools.
Yes, one of the key benefits of this oil is its ability to protect the wood from greying caused by UV exposure and weathering.
Coverage varies depending on the type and condition of the wood, but a 5L tin typically covers a significant area. Refer to the product's specific coverage information on the packaging for precise estimates.
This can occur if the oil was not applied evenly or if the wood's absorbency varies. Apply a second, thinner coat, ensuring to work the oil into any lighter patches. Ensure all previous finishes were removed during preparation.
Ensure the wood was adequately prepared and that the oil has had sufficient time to penetrate and dry. For very dry or porous wood, a second coat might be necessary to achieve the desired richness.
Verify that the oil has fully cured (allow at least 24 hours after the last coat, potentially longer in damp or cold conditions). If the issue persists after full curing, the coverage may have been too thin, or the product might not be adhering as expected, indicating a need for reapplication after proper surface preparation.
Clean tools immediately after use with water. If the oil has started to dry on the tools, soaking them in warm, soapy water can help loosen the residue.
Preparation is Key: Ensure your decking is clean, dry, and free from dirt, mould, and existing finishes before application. For best results, prepare the surface by sweeping or washing and allowing it to dry completely. If the wood is already treated with a sealant or stain, it may need to be removed first.
Compatibility: This decking oil is suitable for all types of softwood and hardwood decking, including exotic hardwoods. It is ideal for use on pre-treated decking.
Application: Apply using a brush or a decking pad. Work the oil into the wood grain, ensuring even coverage. Apply a second coat if necessary after the first coat has dried according to the product's recoat time (typically 4 hours).
Drying Times: The oil is rainproof in 90 minutes and touch dry in 4 hours. Avoid applying in wet conditions or when rain is forecast within 24 hours of the final coat.
Care: Clean application tools immediately after use with water. For general maintenance, sweep the deck regularly. If the finish begins to look dull or worn after an extended period (e.g., annually), a light reapplication may be necessary to maintain optimal protection and appearance.
