Reina Capo Flat Heated Designer Ladder Towel Rail - 1200 X 400 mm - Anthracite

The product includes the towel rail itself, wall brackets, an air vent plug, and blanking caps. Radiator valves, a t-piece, and an electric element may be required depending on your installation type and are not always included.

Basic installation of the rail to the wall can be done by a competent DIYer. However, connecting it to a central heating, dual-fuel, or electric system often requires the expertise of a qualified plumber or heating engineer to ensure safety and prevent leaks.

To use the rail as electric-only, you will need to purchase a compatible electric heating element and a blanking cap. The element screws into one of the radiator's inlets, and the blanking cap seals the other.

The Reina Capo Flat Heated Designer Ladder Towel Rail comes with a 5-year guarantee from the manufacturer.

The towel rail measures 1200mm in height and 400mm in width, with 22mm diameter cross-tubes.

The anthracite finish is designed for durability in bathroom environments. With proper care and avoiding abrasive cleaners, the color should remain consistent.

Check if the central heating system is operational. For dual-fuel or electric-only installations, ensure the electric element is properly connected and powered on. For central heating, check for airlocks and bleed the radiator if necessary. Confirm valves are open.

Turn off the water supply to the rail. Tighten the relevant fittings carefully. If leaking persists, you may need to re-apply thread sealant or consult a professional plumber.

This usually indicates an airlock in the system. Bleed the radiator using the air vent plug to release trapped air. Ensure water is circulating properly.

Ensure only mild cleaning agents are used. Wipe dry after cleaning. If significant rust appears, contact the manufacturer regarding the guarantee, as this may indicate a defect.