Autotek Aerosol Spray Paint - Mediterranean Blue - 300ml

This Mediterranean Blue spray paint is an exact match for Seat Toledo and Ateca models manufactured between 2016 and 2019, matching paint codes LF5A, F5A, and Z5.

Yes, the paint is suitable for application on metal, glass fibre, and rigid plastic surfaces, provided they are properly prepared and primed.

The paint should be touch dry within 10-20 minutes after application. Full curing takes approximately 24 hours.

The paint should be applied in temperatures between 15°C and 25°C for optimal results.

After each use, invert the can and spray for 2-5 seconds to clear the nozzle. This prevents paint from drying and blocking the valve.

While the paint is compatible with many finishes, applying a minimum of two coats of Autotek Grey Primer is recommended for optimum adhesion and the best possible finish.

Yes, it is compatible with nearly all automotive paint finishes, including cellulose finishes, assuming the existing paintwork is in good condition and properly prepared.

Shake the can more thoroughly. Ensure the nozzle is clear by spraying upside down briefly. Maintain a consistent spray distance of 15-25cm and apply thin coats.

The surface may not have been properly cleaned or primed. Ensure the area is free of contaminants and has received adequate primer coats before applying the color.

Coats are likely too thick, or the spray distance was too close. Apply lighter coats and maintain the recommended distance. Allow adequate drying time between coats.

Always turn the can upside down and spray for 2-5 seconds immediately after finishing to clear the nozzle. If blocked, try soaking the nozzle in a suitable solvent (check product instructions for compatible solvents).