Best current price£108.90from Vevor UK
Shopping.co.uk recommended and popular offers
Vevor UK£108.90Visit shop VEVOR KP965 Lathe Chuck, 4-Jaw 9.5 cm Diameter, Metal Lathe Chuck Turning Machine Accessories with 5 Sets of Jaws, Self-centering Tool, for Precision Machining, Grinding Machines, Milling Machines
Visit shop1 offer from £108.90
View price history by clicking the chart icon.
The VEVOR KP965 4-Jaw Lathe Chuck is an essential accessory for woodturners and machinists looking to achieve high precision and stability in their projects. Built from hardened #45 steel, this chuck is designed for those who need a versatile clamping system for items ranging from small pen blanks to large bowls; however, users should ensure their lathe spindle matches the specific M33 x 3.5 TPI thread requirement before purchasing.
| Model Part Number | KP965 |
|---|---|
| Brand | VEVOR |
Yes, the VEVOR KP965 includes the T-handle wrench required for operation.
This chuck is primarily designed for woodturning and general machining tasks; ensure your metal lathe spindle thread matches the M33 x 3.5 requirement.
The body and jaws are constructed from high-strength #45 steel that has undergone quenching and tempering.
The set includes five types: dovetail, round, flat, step, and taper.
Yes, it features a 4-jaw self-centering design for consistent alignment.
Remove all wood shavings, clean the tracks with a rag, and apply a light coat of machine oil to prevent rust.
Clean the jaw tracks with compressed air or a soft brush and apply a small amount of dry lubricant.
Ensure you are using the correct jaw type for the workpiece profile and verify that the T-handle wrench was tightened firmly.
Verify that your lathe spindle is M33 x 3.5 TPI; if it differs, you may require a spindle adapter.
Setup requires threading the chuck onto the lathe's spindle until it is seated firmly against the shoulder. Ensure the lathe is powered off during installation. To swap jaws, use the included T-handle wrench to retract the jaws completely, then slide the new set into the tracks.
Compatibility is strictly limited to lathes with an M33 x 3.5 TPI spindle thread. To maintain the chuck's longevity, wipe down all steel surfaces with a light machine oil after every use to prevent rust, especially if turning green wood, and store it in a dry environment to avoid moisture buildup.
