Best current price£17.39from City Plumbing GB
Shopping.co.uk recommended and popular offers
City Plumbing GB£17.39Visit shop Plumbright Endfeed Elbow 90 Degree 54Mm 30024833
Visit shop
B&Q£19.13Visit shop - Plumbright Endfeed Elbow 90 Degree 54mm 30024833
Visit shop2 offers from £17.39 - £19.13
View price history by clicking the chart icon.
This guide is for plumbers and DIY enthusiasts working with domestic water and low-pressure gas systems. The Plumbright Endfeed Elbow provides a reliable and cost-effective way to create 90-degree joints in copper pipework using solder. While highly dependable for its intended uses, it requires proper soldering technique for a secure and leak-free connection.
| Model Part Number | 12632 |
|---|---|
| Brand | Plumbright |
An end feed fitting, also known as a capillary fitting, is used to join copper pipes. It has a socket that accepts the pipe, and the joint is sealed by heating the fitting and pipe and allowing solder to be drawn into the gap via capillary action.
For potable water systems and general domestic use, lead-free solder is recommended and often required by regulations. Ensure the solder is compatible with copper fittings and the intended application (e.g., specific solders for gas lines).
No, this fitting is specifically rated for low-pressure domestic gas installations only. It is not suitable for high-pressure gas applications.
WRAS (Water Regulations Advisory Scheme) approval signifies that the product meets the high standards set for materials used in contact with drinking water in the UK. It ensures the fitting will not affect the water quality.
Use emery cloth or a pipe cleaning tool to thoroughly clean the outside of the copper pipe end and the inside of the fitting socket. This removes oxidation and ensures a good solder joint.
A 90-degree elbow allows you to make a sharp, right-angled turn in your pipe run. This is essential for navigating obstacles, routing pipes neatly, and achieving specific system layouts.
No, this fitting is specifically designed for use with copper pipes of the corresponding size (54mm). Using it with other pipe materials like PEX or plastic will result in an insecure and unsafe connection.
The joint was likely not heated sufficiently or the flux was inadequate. Reheat the joint, ensure proper flux application, and re-solder.
Ensure the pipe and fitting are clean and properly fluxed. The joint may not be hot enough, or the heat source is being applied incorrectly. Try applying heat to the underside of the joint and introducing solder on the opposite side.
This can occur with aggressive water conditions. Ensure the correct type of copper pipe and fitting are used for the water quality. For long-term issues, consider water treatment.
Check that both the pipe end and the inside of the fitting are clean and free from burrs or debris. Ensure you are using the correct size pipe for the fitting.
Setup:
Compatibility:
Care:
