Best current price£20.63from eBay
Shopping.co.uk recommended and popular offers
eBay£20.63Visit shop LIBERON SPIRIT WOOD DYE DARK OAK 1L
Visit shop
B&Q£24.36Visit shop B&Q - 014444 Spirit Wood Dye Dark Oak 1 Litre Libsddo1L
Visit shop4 offers from £20.63 - £29.99
View price history by clicking the chart icon.
The Liberon Spirit Wood Dye in Brown is designed for woodworkers and furniture restorers seeking to deeply color dense hardwoods like mahogany and oak, or to match existing finishes on antique pieces. Its key benefit is its deep penetration and mixability for custom shades, offering a traditional and effective way to achieve desired wood tones. A potential caveat is its spirit-based nature, requiring appropriate ventilation and application techniques.
| Colour | Brown |
|---|---|
| Model Part Number | 014444 |
| Brand | Liberon |
While ideal for dense hardwoods, it can be used on softer woods like pine, but the color may be more intense and less predictable. Always test on a scrap piece first.
It is recommended to allow the wood dye to dry for a minimum of 24 hours before applying any topcoat to ensure it has fully set and will not bleed.
Once applied and dried, spirit-based dyes are permanent. Lightening is not possible; instead, you would need to sand back the wood or consider a different shade if the color is too dark.
Liberon Spirit Wood Dye is intended for interior use. For exterior projects, a different type of wood stain designed for outdoor conditions would be more appropriate.
Apply the dye with a lint-free cloth or a high-quality brush, working with the grain of the wood. Maintain a wet edge to avoid lap marks and apply thin, even coats.
This dye is best applied to bare wood. If used over existing finishes, ensure they are fully removed or a suitable primer is used, and always test for adhesion and compatibility.
Ensure the wood surface is uniformly prepared and free of dust. Apply the dye with consistent, even strokes using a clean cloth or brush. Avoid over-applying in one area.
Apply additional thin coats of the dye, allowing adequate drying time between each application. Ensure the dye is thoroughly mixed before use.
Allow the wood dye to dry completely (typically 24 hours) before applying any topcoat. Ensure the topcoat is compatible with spirit-based dyes.
Start by mixing small quantities and carefully record the ratios used. Test mixed colors on scrap wood before applying to the main project.
Setup: Ensure the wood surface is clean, dry, and free from dust, grease, and old finishes. Lightly sand the surface if necessary and remove all dust. Stir the dye thoroughly before application. Always test the color on an inconspicuous area of the wood first to ensure the desired shade is achieved.
Compatibility: Liberon Spirit Wood Dye is ideal for use on dense hardwoods such as oak and mahogany. It is also suitable for previously finished woods, making it excellent for furniture and antique restoration. It is compatible with most Liberon finishing products, such as oils, waxes, and lacquers, which should be applied after the dye has completely dried.
Care: The dyed surface should be protected with a suitable topcoat (e.g., wax, oil, varnish) once the dye is fully dry. Clean application tools with a suitable spirit solvent immediately after use. Store the dye in a cool, dry place away from direct sunlight and ignition sources.
