Eagle Power Supply - 12V - 2250mA - Black

The maximum length depends on the specific LED tape's power consumption per meter. This 27W (2250mA) supply can power most standard SMD 3528 and 5050 LED tapes up to a total load of 27W. For example, a 5050 LED tape consuming 14.4W/meter could be powered up to approximately 1.8 meters (27W / 14.4W/m).

Switched Mode Power Supplies (SMPS) use electronic switching to convert AC mains voltage to DC voltage efficiently. They are typically smaller, lighter, and more energy-efficient than older linear power supplies.

No, the 5.5mm (outer) x 2.1mm (inner) DC socket is permanently attached to the 3.4m lead. You will need a device with a matching input jack.

Check your LED tape's specifications for its required voltage (must be 12V DC) and total power consumption (must not exceed 27W). Also, verify the input connector matches the 5.5mm x 2.1mm size and is center-positive.

This power supply is designed for indoor use only. It is not rated for weather resistance or outdoor environments.

Please refer to the retailer or manufacturer's documentation for specific warranty information, as this can vary.

Ensure the mains lead is securely plugged into the power supply and a functioning wall socket. Check the wall socket with another device.

Verify that the DC output socket is fully inserted into the device. Check that the device's power requirement does not exceed 12V/2250mA. Ensure the device is compatible with a center-positive 5.5mm x 2.1mm connector.

Ensure all connections are secure. Check if the total power draw of the connected device is within the 27W limit. A loose connection or overloaded output can cause flickering.

Ensure the unit is in a well-ventilated area and not covered or enclosed in a way that restricts airflow. If it remains excessively hot during normal operation, discontinue use and check the connected device's power draw.