Best current price£10.34from eBay
Shopping.co.uk recommended and popular offers
eBay£10.34Visit shop Toyota White 040 (Super White 2) 150ml XDTY602 Hycote Genuine Quality Product
Visit shop4 offers from £10.34 - £13.49
View price history by clicking the chart icon.
This Hycote Double Acrylic Spray Paint in Toyota White 040 (Super White 2) is designed for car enthusiasts and DIYers seeking a factory-match finish for vehicle touch-ups and custom projects. Its key benefit is providing up to double the coverage of standard spray cans thanks to compressed consol technology, leading to efficient use and a flawless result. A potential caveat is the need for proper surface preparation, including priming, for optimal adhesion and durability.
| Colour | White |
|---|---|
| Model Part Number | 040 |
| Brand | Hycote |
The specific colour code is White 040, also known as Super White 2 for Toyota vehicles.
This can offers up to double the coverage of conventional spray cans due to its compressed consol technology.
For optimal adhesion and a professional finish, it is highly recommended to use a suitable Hycote primer before applying the colour spray.
Yes, it is suitable for most plastic surfaces, provided they are properly primed first.
After painting, turn the can upside down and spray for a few seconds until clear propellant emerges. This prevents the nozzle from clogging.
Hold the can upright and approximately 25-30cm (10-12 inches) from the surface you are painting.
Yes, provided the bare metal surface is first cleaned and treated with an appropriate primer for metal.
Shake the can thoroughly before and during use. Ensure the can is held at the correct distance and angle. Clean the nozzle by inverting the can and spraying briefly after use. If the nozzle is blocked, remove and soak it in a solvent like cellulose thinners.
Ensure the surface is properly prepared: clean, dry, and free from grease, wax, or rust. Apply a suitable primer before the topcoat. Check compatibility with the underlying surface material.
Apply paint in multiple thin, even coats rather than one thick coat. Ensure adequate drying time between coats. The 'double coverage' is relative to standard cans; very large areas may still require multiple cans.
Apply paint in thinner coats and from the recommended distance. Avoid over-application in one go. Allow sufficient drying time between coats.
Setup: Ensure the surface to be painted is clean, dry, and free from grease and dirt. For optimal results, apply a suitable Hycote primer. Shake the can vigorously for at least two minutes after hearing the mixing ball rattle. Hold the can upright and approximately 25-30cm from the surface. Apply paint in thin, even coats, allowing adequate drying time between each coat. For a professional finish, it is recommended to combine with Hycote primer and lacquers.
Compatibility: Suitable for acrylic and cellulose paint finishes. Adheres to most primed metal, plastic, and ceramic surfaces. Test on an inconspicuous area first if unsure.
Care: Store the can in a cool, dry place. After use, invert the can and spray for a few seconds to clear the nozzle. This prevents blockages for future use.
