UFO Chain Slider For KTM EXC125 1997-2007 - Orange
Best current price£22.26from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£22.26Visit shop UFO Orbital Sander Adjusts KTM SX Sxf 98-07 EXC Exc-F SMR 98-07 Orange
Visit shopeBay£22.26Visit shop All Offers
4 offers from £22.26 - £24.99
View price history by clicking the chart icon.
eBayUFO Orbital Sander Adjusts KTM SX Sxf 98-07 EXC Exc-F SMR 98-07 Orange
£21.80 delivery
£22.26
Visit shop
UFO Orbital Sander Adjusts KTM SX Sxf 98-07 EXC Exc-F SMR 98-07 Orange£21.70 delivery£22.26Visit shop →
UFO Chain Slider For KTM SX/SX-F/Exc Orange 97-07 Kt03069-127Free delivery in 1–3 days£24.99Visit shop →
GhostBikes.comUfo Orange Kt03069#127 - Chain Slider For Ktm Exc125 1997-2007
£3.99 delivery
£22.99
Visit shop
Product Information
Full details
The UFO Chain Slider is an essential maintenance upgrade for KTM EXC125 owners (1997-2007 models) looking to protect their swingarm from accelerated chain wear. Designed as a direct replacement part, it offers a perfect fit and high-durability construction to ensure your drivetrain remains protected under tough riding conditions. While it provides excellent protection, users should note that it requires periodic inspection for wear during routine service intervals to maintain optimal chain tension and performance.
All features
| Colour | Orange |
|---|---|
| Model Part Number | KT03069#127 |
| Brand | UFO |
Extended Product Information
FAQs
Is this compatible with KTM models outside the 1997-2007 range?
No, this specific part (MPN KT03069#127) is designed strictly for the geometry of the 1997-2007 KTM EXC125 swingarm.
Do I need to remove the swingarm to install this?
No, you do not need to remove the swingarm. You only need to provide enough slack in the chain to slide the new component into position.
What tools are required for installation?
Typically, you will need a standard socket set or hex key set that corresponds to your original KTM fasteners.
How often should I replace the chain slider?
Replacement frequency depends on your riding intensity, but it should be checked every 10-15 hours and replaced once the grooves are deep enough to risk chain contact with the swingarm.
Does this product come with mounting bolts?
No, this part is designed to be used with your motorcycle's existing stock hardware.
Troubleshooting
Slider does not sit flush against the swingarm
Check for built-up mud or debris between the swingarm and the mounting points; clean thoroughly before re-installation.
Slider moves or vibrates during operation
Ensure that the original hardware is tightened to the manufacturer's recommended torque specifications for your specific KTM model.
Pros and Cons
Pros
- Specifically tailored for KTM EXC125 1997-2007
- Uses original hardware for quick installation
- High-density material resists friction and wear
- Restores smooth chain movement and reduces noise
Cons
- Specific to a limited range of KTM model years
- Requires manual removal and reinstallation of the chain
- Does not include replacement bolts if factory ones are damaged
Setup, Compatibility & Care
Installation involves removing the rear chain guard and potentially loosening the drive chain to allow enough slack to pull the old slider off the swingarm guide rail. Since this part is designed to work with your existing stock hardware, simply slide the new unit into place, ensuring it is properly seated against the swingarm mounting points. For care, inspect the slider every 10 to 15 hours of riding. If you see signs of 'shark-fin' wear patterns or if the chain is beginning to make contact with the swingarm metal, replace the slider immediately to prevent expensive frame damage. Always use a light application of silicone spray on the slider surface if you notice excessive friction.