Primaflow Lead to Copper Coupler 1/2" 7lb x 15mm

You will need a pipe cutter, deburring tool, and a wrench or spanner of the appropriate size to tighten the compression fitting.

No, the Primaflow Lead to Copper Coupler is designed for use with lead and copper pipes only.

Tighten the fitting until it is snug and leak-proof. Avoid over-tightening, as this can damage the fitting. Refer to the manufacturer's torque specifications.

Try tightening the fitting. If the leak persists, disassemble the joint, check for damage, and reassemble with new fittings if needed.

The Primaflow coupler is suitable for standard plumbing systems. Always ensure the fitting is rated for the pressure of your system.

Inspect the fitting regularly, at least every six months, or whenever you perform other plumbing maintenance.

DZR brass is a type of brass that is resistant to dezincification, a form of corrosion that can weaken brass fittings.

Replacement parts, such as compression olives, can be purchased from most plumbing supply stores or online retailers.

Tighten the compression fitting. If the leak persists, disassemble the joint, check the pipe ends for damage, and reassemble with new fittings if necessary.

Ensure the pipe ends are properly aligned and inserted into the coupler. Use the correct tools to apply sufficient torque, but avoid over-tightening.

Replace the fitting immediately to prevent further damage to the plumbing system. Ensure the fitting is compatible with the water chemistry to prevent future corrosion.