Shopping.co.uk

Tamiya Carbon Decal Plain Weave - Extra Fine 1:24 Model Kit Accessory - MPN: 12680

Tamiya Carbon Decal Plain Weave - Extra Fine 1:24 Model Kit Accessory - MPN: 12680

--Scalextric \n-- Hornby \n--Models\n--Radio Control\n--Sylvanian Families\n\n--Scalextric \n-- Ho...

Best current price£7.74from eBay

Best offers

Shopping.co.uk recommended and popular offers

All Offers

5 offers from £7.74 - £9.98

View price history by clicking the chart icon.

eBayTamiya 12680 - 1:6/1:12/1:24 Carbon Decor Smooth/Extra Fine - New
£15.04 delivery
£7.74
Visit shop
OnBuy.comTamiya 12680 Carbon Decal Plain Weave - Extra Fine 1:24 Model Kit Accessory
Free delivery in 1–3 days
£9.07
Visit shop

Product Information

Full details

This guide is for model enthusiasts working with 1:24 scale kits, particularly those featuring carbon fiber parts. The Tamiya Carbon Decal Plain Weave - Extra Fine (MPN: 12680) offers a simple yet effective way to add realistic carbon fiber textures to your models, significantly enhancing visual detail. A potential challenge is achieving a perfectly smooth application on highly curved surfaces without practice.

All features

Model Part Number12680
BrandTamiya

Extended Product Information

FAQs

What scale are these carbon decals for?

These decals are specifically designed for 1:24 scale model kits.

What is the difference between plain weave and twill weave carbon fiber?

Plain weave has a simpler, criss-cross pattern, while twill weave has a more diagonal, repeating pattern. This product features the plain weave.

Can I use these decals on painted surfaces?

Yes, these decals can be applied to properly prepared and painted model surfaces.

Do I need special tools to apply these decals?

A sharp hobby knife or scissors for cutting, a soft brush for application, and optionally Tamiya MARK FIT or MARK FIT STRONG setting solutions are recommended for best results.

How long does it take for the decals to dry?

Allow at least a few hours for the decals to fully dry and set, especially after using setting solutions. Avoid touching them during this period.

Can these decals be weathered or painted over?

Once applied and sealed with a clear coat, they can generally be weathered like the rest of the model. Painting directly over them is not recommended as it may obscure the carbon weave pattern.

What is the MPN for this product?

The Manufacturer Part Number (MPN) for this product is 12680.

Troubleshooting

Decal will not conform to curves

Ensure sufficient MARK FIT or MARK FIT STRONG is used on both the surface and over the decal. Gently encourage the decal into the curve with a soft brush.

Air bubbles trapped under the decal

Carefully prick the bubble with a fine needle and gently press the air out. Alternatively, lift a corner of the decal before it fully sets and reapply, pressing out air.

Decal tears during application

Cut the decal into smaller, more manageable pieces before application. Ensure the surface is adequately prepared with setting solution to allow for smooth sliding.

Decal appears too large or small for the part

Practice cutting and fitting on scrap material or an unpainted model part first. Adjust cutting as needed for precise placement.

Pros and Cons

Pros

  • Significantly improves model realism with authentic carbon fiber appearance.
  • Easy to cut and apply for detailed coverage.
  • Designed specifically for 1:24 scale models.
  • Works well with Tamiya's decal setting solutions for seamless integration.
  • Adds a high-quality finish to various model parts.

Cons

  • Requires careful cutting for precise fitting.
  • May require practice for perfect application on very complex curves.
  • Only provides visual representation; does not add physical texture.
  • Best results achieved with specialized decal setting solutions, adding to cost.

Setup, Compatibility & Care

Setup:

  1. Identify the model parts you wish to cover with carbon fiber.
  2. Carefully cut the decal sheet to the required shape and size using a sharp hobby knife or scissors.
  3. Apply a small amount of Tamiya MARK FIT or MARK FIT STRONG to the model surface where the decal will be placed. This helps the decal adhere and conform to the surface.
  4. Gently slide the decal from its backing paper onto the prepared surface.
  5. Use a soft brush or cotton swab to carefully position the decal and remove any air bubbles.
  6. Apply another coat of MARK FIT or MARK FIT STRONG over the decal to help it settle into panel lines and curves.
  7. Allow the decal to dry completely. For added protection, a clear coat can be applied afterward.

Compatibility:

  • Primarily designed for 1:24 scale model kits.
  • Compatible with Tamiya MARK FIT and MARK FIT STRONG decal setting solutions.
  • Can be applied to most standard plastic model surfaces.

Care:

  • Once applied and sealed with a clear coat, the decals are permanent.
  • Handle the model with care to avoid scratching the decal surface.
  • If cleaning the model, use a soft, dry or slightly damp cloth. Avoid harsh chemicals or abrasive cleaners.

Price History

DatePrice
Visit shop