Oreck Orbiter Brush - Green
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Oreck Orbiter Brush - Green is designed for commercial use, offering an economical light scrub for smooth, textured, or painted concrete floors. Its primary benefit is the efficient removal of ground-in dirt and grime from various surfaces, including those with grooves and recesses. A potential caveat is its suitability primarily for light scrubbing tasks rather than heavy-duty deep cleaning.
All features
| Model Part Number | 237.057 |
|---|---|
| Brand | Oreck |
Extended Product Information
FAQs
What type of floors is this brush best suited for?
This brush is best suited for smooth, textured, or painted concrete floors. It is designed for economical light scrubbing on these surfaces.
How do I know if my Oreck floor machine is compatible?
This brush is compatible with Oreck Commercial Orbiter models ORB550MC, ORB600MW, and ORB700MC.
Can this brush be used for heavy-duty deep cleaning?
No, this brush is designed for light scrubbing tasks and may not be effective for heavy-duty deep cleaning. For tougher jobs, a more abrasive brush may be necessary.
How do I clean the brush after use?
After each use, remove loose debris. You can rinse the brush with water and allow it to air dry completely. Avoid using harsh chemicals.
Do I need any tools to install the brush?
No, the brush is designed for tool-free installation and removal. It should click into place on compatible Oreck Orbiter floor machines.
What is the diameter of the brush and its bristles?
The brush has a 12-inch diameter, and the individual bristles have a diameter of 0.015 inches.
Troubleshooting
Brush not attaching securely
Ensure the floor machine is powered off and unplugged. Check for any debris or obstructions in the mounting mechanism on both the brush and the machine. Realign and push firmly until it clicks.
Inadequate cleaning performance
Verify that the brush is compatible with your Oreck Orbiter model. Ensure the floor machine is operating at the correct speed. Check if the floor requires a more aggressive brush for heavy-duty cleaning. Clean any embedded debris from the brush bristles.
Bristles appearing worn or damaged
Inspect the bristles for excessive wear or damage. If significantly worn, the brush may need replacement for optimal performance. Ensure you are not using the brush for tasks beyond its intended light-scrubbing purpose.
Pros and Cons
Pros
- Effectively cleans ground-in dirt from concrete floors.
- Designed to reach into grooves and recesses on textured surfaces.
- Easy to install and remove without tools.
- Durable construction for long-lasting use.
- Economical option for light-duty scrubbing.
Cons
- Primarily suited for light scrubbing; may not be effective for heavy-duty cleaning.
- Best performance on concrete floors; less effective on other floor types.
- Requires a compatible Oreck Orbiter floor machine.
Setup, Compatibility & Care
Setup:
- Ensure the compatible Oreck Commercial floor machine (ORB550MC, ORB600MW, or ORB700MC) is powered off and unplugged.
- Align the brush with the mounting mechanism on the floor machine.
- Push the brush firmly onto the machine until it securely clicks into place. No tools are required.
Compatibility:
This brush is specifically designed for use with the following Oreck Commercial Orbiter floor machines:
- ORB550MC
- ORB600MW
- ORB700MC
Care:
- After each use, remove any loose debris from the bristles.
- For deeper cleaning, rinse the brush with water and allow it to air dry completely.
- Store the brush in a clean, dry place when not in use to maintain bristle integrity.
- Avoid using harsh chemicals that could degrade the polypropylene material.