Best current price£21.95from eBay
Shopping.co.uk recommended and popular offers
eBay£21.95Visit shop 1.5 INCH SOLVENT WELD BALL VALVE AND MULTISTAGE HOSETAIL KIT POND HOSE PIPE FLOW
Visit shop
B&Q£22.95Visit shop B&Q - 1.5" (Inch) Solvent Weld Ball Valve And 2 X Stepped Hosetail Kit
Visit shop3 offers from £21.95 - £22.95
View price history by clicking the chart icon.
This Pisces 1.5" Ball Valve and Hosetail Kit is designed for pond enthusiasts and aquaculturists needing reliable water flow control in their filtration systems. Its key benefit is the robust design and versatile hosetail fittings, ensuring a secure and adaptable connection to various pipe and hose sizes. A potential caveat is that it requires solvent weld for installation, meaning specific adhesives and preparation are necessary.
| Model Part Number | KKP501 |
|---|---|
| Brand | Pisces |
The primary function is to provide a controllable shut-off point and adaptable hose connection for 1.5" solvent weld pond plumbing systems.
The stepped hosetails are designed to fit 1.5", 1.25", 1", 0.75", and 0.5" hose sizes.
Yes, for the solvent weld installation, you will need PVC primer and PVC cement specifically designed for the type of pipe you are using, along with an applicator for the cement.
This valve is designed for typical pond circulation systems, which operate at low pressure. Always check the pressure rating if using in applications beyond standard pond setups.
Proper application of PVC primer and cement, combined with holding the joint securely during the initial set time and allowing adequate curing, is crucial for a leak-proof solvent weld connection.
Ball valves offer a quick quarter-turn operation for fully open or closed positions and are generally more robust and easier to use for simple on/off control compared to some other valve types.
Yes, the hosetails are designed to be attached to the ball valve and can be removed or replaced if necessary, provided they are compatible with the valve's outlet.
Ensure the valve is fully open or closed. If it remains stiff, check for any obstructions in the pipe or valve body. Ensure the handle is fully seated on the valve stem.
Ensure the correct step on the hosetail is used for your hose size. Check that the hose is pushed fully onto the hosetail. Tighten the hose clamp securely, but do not overtighten. Replace the hose if it is old or damaged.
Verify that both surfaces were properly primed and cemented, and that the joint was held securely during the initial set time. Ensure you are using the correct type and amount of primer and cement for PVC and the ambient temperature. Allow sufficient curing time before pressure testing.
Contact the manufacturer or retailer for a replacement part. Avoid excessive force when operating the valve.
Setup: Ensure you are working with clean, dry PVC pipes and fittings. Apply PVC primer to both the inside of the 1.5" ball valve fitting and the outside of the pipe you are connecting. Once primed, apply PVC cement evenly to both surfaces and immediately push the pipe into the valve fitting with a quarter-turn motion. Hold firmly for 30 seconds to prevent the pipe from backing out. Allow adequate curing time as per the cement manufacturer's instructions before operating the valve. Attach the stepped hosetail to the desired outlet on the ball valve and secure your hose with a suitable hose clamp.
Compatibility: This kit is designed for 1.5" solvent weld PVC pipe systems. The included stepped hosetails are compatible with flexible hoses in sizes 1.5", 1.25", 1", 0.75", and 0.5". Always ensure your hose clamp and hose material are compatible with pond water conditions.
Care: Periodically inspect the valve handle and seals for any signs of wear or damage. Ensure the valve operates smoothly. Keep the exterior of the valve clean by wiping it with a damp cloth. Avoid using abrasive cleaners or solvents on the valve body. Ensure hose connections are secure and free of leaks.
