Best current price£6.99from My Motor World
Shopping.co.uk recommended and popular offers
My Motor World£6.99Visit shop Hycote Green Nissan Marine Metallic Double Acrylic Spray Paint 150Ml
Visit shop8 offers from £6.99 - £50.99
View price history by clicking the chart icon.
This Hycote spray paint is designed for automotive touch-ups and DIY projects, offering a convenient way to achieve a professional finish with its high-concentration formula. Its key benefit is double coverage compared to standard aerosols, meaning you get more paint and less propellant, leading to efficient use and a durable, color-matched result for Nissan Marine Green vehicles. A potential caveat is the need for proper surface preparation to ensure optimal adhesion and finish.
| Colour | Green |
|---|---|
| Model Part Number | XDNS304 |
| Brand | Hycote |
| Container Volume | 150ml |
The paint is touch dry in approximately 15-20 minutes and fully cured within 1-2 hours, depending on temperature and humidity. Recoating is possible after 30 minutes.
Yes, this paint is suitable for plastics. For best results, ensure the plastic is clean and consider using a plastic primer first to guarantee adhesion and a smooth finish.
Apply in light, even coats. Typically, 2-3 coats are sufficient for good coverage and durability, but this may vary depending on the surface and desired finish. The high coverage formula means fewer coats might be needed compared to standard paints.
While the paint offers good resistance to sunlight and fading, it is not specifically formulated for high chemical or gasoline resistance. For areas exposed to such substances, a specialized automotive lacquer or coating might be more appropriate.
DV8 is the manufacturer's paint code for Nissan Marine Green, ensuring the color precisely matches the original factory finish.
After use, invert the can and spray for a few seconds to clear the nozzle. Store the can upright in a cool, dry place away from direct sunlight and sources of ignition.
Ensure the can is adequately shaken. Clear the nozzle by inverting the can and spraying for a few seconds. If the problem persists, the nozzle may be blocked, and the can should be replaced.
The surface may not have been properly prepared. Ensure it is clean, dry, and free from contaminants. A suitable primer may be required, especially for plastics or bare metal.
This is usually caused by applying the paint too thickly or holding the can too close to the surface. Apply in lighter, more even coats and maintain the recommended spraying distance.
Ensure the can is shaken frequently during use and that coats are applied evenly. Check if the surface is excessively porous or if a primer is needed. The 'double coverage' claim is relative to standard aerosols and still requires proper application technique.
Preparation is Key: Before application, ensure the surface is clean, dry, and free from grease, wax, and rust. For best adhesion on plastics, use a suitable plastic primer. For bare metal, apply a metal primer. Lightly sand glossy surfaces to create a key.
Application: Shake the can vigorously for at least two minutes before use and periodically during application. Hold the can upright, approximately 15-25 cm from the surface. Apply in light, even coats, allowing sufficient flash-off time between coats.
Compatibility: This paint is compatible with OEM finishes and can be applied over existing acrylic and cellulosic paints. It adheres well to metals, plastics, wood, and ceramics. Always test on an inconspicuous area first if unsure.
Care: Once fully cured, the painted surface can be cleaned with mild soap and water. Avoid abrasive cleaners or solvents that could damage the finish.
