Best current price£96.48from eBay
Shopping.co.uk recommended and popular offers
eBay£96.48Visit shop 160 x 35mm KNOTT Brian James Type Trailer Brake Shoes for 6 x Brake Drums
Visit shop1 offer from £96.48
View price history by clicking the chart icon.
This guide is for owners of triple-axle trailers, particularly those with KNOTT or Brian James trailer axles, needing to replace their brake drums. The key benefit is providing a complete, ECE R90 approved set for six brake drums, ensuring reliable braking performance. A caveat to be aware of is that while dimensions may be similar, brake shoes are make-specific, so confirming KNOTT style is crucial before purchase.
| Model Part Number | BS029_3PK |
|---|---|
| Brand | AB Tools |
This pack contains 12 brake shoes, which is enough for 6 brake drums, making it suitable for triple-axle trailers.
These brake shoes are specifically designed for KNOTT style axles and are compatible with certain trailer brands like Brian James. Always confirm your trailer's axle type before purchasing.
ECE R90 approval is a European standard ensuring that replacement brake parts meet or exceed the performance of the original equipment manufacturer's parts in terms of safety, performance, and durability.
While you would have spare parts, the pack is optimized and priced for triple-axle coverage (6 drums). You would need to purchase fewer shoes if only covering fewer axles, but this pack provides a complete set for a triple axle.
KNOTT is a common manufacturer of trailer axles and braking systems. Visually inspecting your axle components or consulting your trailer's manual are the best ways to confirm the style. These shoes fit a 160mm x 35mm size within a 6-inch drum.
Yes, it is strongly recommended to replace brake shoes on both drums of a single axle simultaneously. This ensures balanced braking performance and prevents uneven wear.
Before fitting the new shoes, it is essential to thoroughly clean the inside of the brake drum. This removes any dust, rust, or debris that could affect performance or cause premature wear.
Verify that the axle is KNOTT style and the brake drum internal diameter is approximately 6 inches. Ensure you have the correct 160mm x 35mm shoe size. Check that no foreign debris is obstructing the fitment.
Ensure the brake drums are clean and free of rust or glaze. Check that all springs are correctly installed and tensioned. Verify that the brake shoes are correctly seated against the backplate. Adjust the brake mechanism according to the trailer manufacturer's specifications.
This can sometimes occur with new brake shoes as they bed in. If the noise persists after a short period of use, inspect the brake shoes and drum for damage, excessive wear, or contamination. Ensure all springs are properly fitted.
Use appropriate brake spring pliers or tools designed for this purpose. Ensure you are using the correct springs provided in the kit for each specific mounting point.
Compatibility:
Important Note: Always confirm your existing brake system is KNOTT style, as brake shoes are not universally interchangeable even if dimensions appear similar.
Setup (Installation):
Care:
